Lists all the different platforms the marketplace supports
JVC LX-UH1 & LX-NZ3 Projector Driver
This driver allows 2-Way RS232 communication with the JVC LX-UH1 & LX-NZ3 projector.
This product cannot be added to thecart because you are not logged in.
As integrators there are times where we cannot replace ISP provided hardware (eg Cable modem or NBN modem). As such we are reliant on the uptime of these devices and when they go down they take down many of the devices in the home. The Chowmain internet rebooter driver allows reboot of modems, routers, switches, access points and other networking equipment directly from Control4's built in relays.
The idea is that the driver will monitor a specific website periodically and if it fails to retrieve the content from that website multiple times it will execute the reboot sequence. Note that this driver requires wiring of Control4's relays upto the power supplies of the networking equipment.
Add Geofencing, Google Home, Amazon Echo, SMS, Phone Calls, Push Notifications and more to Control4 via Chowmain's bi-directional IFTTT Maker Driver.
Integrate Hikvision Face Recognition TerminalsWhis this driver you are able to:Open Door connect on readersReceive events of:User identified (one event for user on programming tab)Users not recognizedTerminal door bellTerminal Contact Sensors
Hikvision, who is a popular surveillance manufacturer, produce a range of products for both residential and commercial applications. As one of our top requested drivers we felt that we needed to create the ultimate Hikvision driver for Control4.
This driver pushes the integration of Hikvision by offering integration to NVR/DVRs and IP Cameras which allows integrators to push the boundaries of security and home automation. This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.
Minimum quantity for "Hibersense" is 1.
Many Jewish people who strictly observe Shabbat refrain from what turning electricity on or off during this period. They may also refrain from making adjustments to the intensity of electrical appliances.
The Chowmain Hebcal module for URC imports data from Hebcal.com. This module helps by automating detection of Jewish holidays and your standard Shabbat (observed from a few minutes before sunset on Friday evening until the appearance of three stars in the sky on Saturday night). By firing these events it assists with notification of Candle lighting (18 minutes before sundown) and Havdalah (after the appearance of three stars in the sky) along with the automation of electronic devices during this period.
This driver is a simple with multiple icons to control a mirror or heated towel rail with a Relay.
Features
These advanced Control4 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install. Also supports the FIX matrix.
We're offering drivers in the following sizes to help eliminate extra bindings created by more "generic" versions including:
In addition you can save and recall presets and scenes.
These advanced ELAN 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install.
Currently we are providing an 80x80 matrix driver for ELAN. If you only have an 8x8, for example, simply connect the first 8 inputs and outputs.
In addition we have also implemented saving and recalling presets through custom commands.
The YATUN driver suite exposes various Number Variable input connections in its drivers.
This generic monitor can be used to connect to these connections, enabling compatibility of all Number Variable connections in the YATUN driver suite with BMS Monitor.
Epson provides a universal API (ESC/VP21) for their range of projectors for both IP and RS232 based controls.
The Chowmain Epson universal projector driver for Control4 provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.
The Chowmain Epson universal projector driver for ELAN provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.
The Chowmain Epson universal projector driver for RTI provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
The Chowmain M1 driver for Control4 offers extensive integration of the M1 functionality to truely expand Control4's functionality to not only security based services but also occupancy and input/output expansion for automation tasks and is compatible with both Ness and ELK M1 systems.
eGauge is an affordable, flexible, secure, web-based electric energy and power meter that can measure up to 30 circuits. It is used to measure and record total building electrical consumption, solar, wind, consumption of individual circuits, such as appliances or geothermal system pumps, and motors.
The Chowmain eGauge driver provides live data feedback from the eGauge unit. This data can be viewed on the Control4 T3 touch screens. The data can be used in Control4’s programming as variables or have a minimum and maximum event trigger set in the driver itself. This provides live automated responses to changes in energy usage.
The Chowmain Echonet Lite driver opens Control4 integration into any Echonet Lite enabled Home Air Conditioner unit. Popular manufacturer's such as Mitsubishi, Panasonic, Fujitsu, Toshiba, Daikin and more already adopt the Echonet Lite protocol.
Homemation Occupancy DriverThis driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.Features
This serial RS232 driver supports the Display Technologies Side Masking Projection Screens. It allows you to easily set the aspect ratio to the following configuration through a device specific command:
The latest version of this driver now also supports up to 20 presets.
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
The Daikin Airbase BRP15B61 lets you control your Daikin ducted or SkyAir system via apps on your phone or tablet. This module is easily can be easily retrofit without installation of new wiring as it is powered by (and communicates via) the Daikin P1 and P2 bus terminals and communicates via wifi.
Thanks to Chowmain the Airbase is now integrated into Control4 for full two way control and feedback over temperature, HVAC mode, setpoint, fan speed and zone control. We have also added additional functionality to the driver to handle presets and scheduling internally.
Setup of hardware and driver should take you no more than 30 minutes once you get the hang of it.
Dahua, who is a popular surveillance manufacturer, produce a range of PTZ and NON PTZ based IP cameras for a range of residential and commercial applications along with network video recorders (NVRs). As one of our top requested drivers we felt that we needed to create the ultimate Dahua driver for Control4. We have worked closely with Dahua to ensure that the integration provides the best user experience possible. This driver pushes the integration of Dahua by offering functionality that allows the cameras to push the boundaries of security and home automation. This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.
Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.
Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.
Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.
Homemation – Crestron Lighting Driver
This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.
Secondary Drivers:
4Drivers has driver to make a seamless integration with tese Biometric readers You can: Import all users Choose actions for each one Open relay if connected to solution Try this easy integration and robust solution on you project
ControlByWeb manufactuer IP enabled inputs, sensors & outputs. Integration into Control4 enables Control4 to monitor and control these inputs and outputs
MSRP: $100 USD
The Contact Us webview driver for Control4 provides dealers with a professional looking contact us page on the T3 touchscreen with customisable company logo, company contact details, google map and clickable URL to the company website.
This adds the final touch to a professionally installed system and provides dealers with a cheap way of marketing their company to people who utilise the touchscreen.
This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.
Properties
Connections
FAQ
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
Minimum quantity for "Connector Blind RF433Mhz and Dooya Bridge" is 1.
Chowmain’s Command to Event driver for ELAN allows ELAN programmers to override existing remote control buttons to fire event maps.
This lets the programmers to be more creative in the solutions they provide their customers to add extra functionality.
For example they can make a one way IR bluray driver dim lights when the play, pause or stop buttons are pressed on the remotes.
Another example is that they can assign a hard button to toggle a light on and off or perhaps create a macro to execute a sequence of commands.
