Control by Web

MSRP: $100.00
Chowmain LTD
30 days
Platform:
Version: 20221215
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

Overview
ControlByWeb manufactures IP based monitoring and control devices that provide various inputs and outputs such as relays, digital inputs, analog inputs, 1-wire bus for monitoring of temperature & humidity, etc.  Chowmain has integrated CBW's modules including the X-3xx, WebRelay, X-4xx, WebSwitch, X-6xx and XW-1xx series into Control4 to expose their IO's for various integration requirements.

Universal Driver Features

  • Reconfigures itself with RELAY and CONTACT_SENSOR bindings dependant on device capabilities
  • Adds NUMBER and STRING variables based on device capabilities
  • Tested with the following models
    • X-1XX
    • X-3XX
    • X-4XX
    • X-6XX
    • WebRelay
    • WebSwitch

X-310 Features

  • 4 x relay outputs
  • 4 x sensor inputs
    • NOTE – Control4 polls the sensors. As such it may take up to 5 seconds for the input to respond. Do not use the inputs if timing is crucial.
  • Exposes values to variables for programming
    • Last Poll Time
    • Serial Number
    • Onboard Timestamp
    • Internal Temperature
    • Memory Power Up Flag
    • Device Power-Up Flag
    • Power Loss Counter
    • Input 1 State
    • Input 2 State
    • Input 3 State
    • Input 4 State
    • Relay 1 State
    • Relay 2 State
    • Relay 3 State
    • Relay 4 State
    • High Time 1
    • High Time 2
    • Raw Count 1
    • Raw Count 2
    • Voltage Input
    • Voltage Input Alarm
    • Units
    • Sensor 1 Temp
    • Sensor 2 Temp
    • Sensor 3 Temp
    • Sensor 4 Temp
    • Sensor 1 Alarm
    • Sensor 2 Alarm
    • Sensor 3 Alarm
    • Sensor 4 Alarm
    • Count 1
    • Count 2
    • Extra Variable 0
    • Extra Variable 1
    • Extra Variable 2
    • Extra Variable 3
  • Programming Actions
    • Ability to clear memory flag
    • Ability to clear device flag
    • Ability to clear power loss counter

X-320 Features

  • 2 x Configurable GPIOs
    • Can be configured in either inputs or outputs
  • Exposes values to variables for programming
    • Last Poll Time
    • Serial Number
    • Onboard Timestamp
    • Internal Temperature
    • Internal Voltage
    • Memory Power Up Flag
    • Device Power-Up Flag
    • Power Loss Counter
    • IO1 State
    • IO2 State
    • IO1 Direction
    • IO2 Direction
    • High Time 1
    • High Time 2
    • Raw Count 1
    • Raw Count 2
    • Rate 1
    • Rate 2
    • Raw Frequency
    • Frequency
    • Frequency Alarm
    • Analog 1 State
    • Analog 2 State
    • Analog 3 State
    • Analog 4 State
    • Analog 1 Alarm
    • Analog 2 Alarm
    • Analog 3 Alarm
    • Analog 4 Alarm
    • Units
    • Sensor 1 Temp
    • Sensor 2 Temp
    • Sensor 3 Temp
    • Sensor 4 Temp
    • Sensor 5 Temp
    • Sensor 6 Temp
    • Sensor 1 Alarm
    • Sensor 2 Alarm
    • Sensor 3 Alarm
    • Sensor 4 Alarm
    • Sensor 5 Alarm
    • Sensor 6 Alarm
    • Extra Variable 0
    • Extra Variable 1
    • Extra Variable 2
    • Extra Variable 3
  • Programming Actions
    • Ability to clear memory flag
    • Ability to clear device flag
    • Ability to clear power loss counter

X-332 Features

  • 16 x relay outputs
  • 16 x sensor inputs (digital inputs) (NOTE – Control4 polls the sensors.  As such it may take up to 5 seconds for the input to respond.  Do not use the inputs if the timing is crucial.)
  • 4 x analog inputs (as variables)
  • 4 x temperature sensors

Exposes values to variables for programming

  • Last Poll Time
  • Serial Number
  • Onboard Timestamp
  • Internal Temperature
  • Memory Power Up Flag
  • Device Power-Up Flag
  • Power Loss Counter
  • Analog 1 State
  • Analog 2 State
  • Analog 3 State
  • Analog 4 State
  • Analog 1 Alarm
  • Analog 2 Alarm
  • Analog 3 Alarm
  • Analog 4 Alarm
  • Input 1 State
  • Input 2 State
  • Input 3 State
  • Input 4 State
  • Input 5 State
  • Input 6 State
  • Input 7 State
  • Input 8 State
  • Input 9 State
  • Input 10 State
  • Input 11 State
  • Input 12 State
  • Input 13 State
  • Input 14 State
  • Input 15 State
  • Input 16 State
  • Relay 1 State
  • Relay 2 State
  • Relay 3 State
  • Relay 4 State
  • Relay 5 State
  • Relay 6 State
  • Relay 7 State
  • Relay 8 State
  • Relay 9 State
  • Relay 10 State
  • Relay 11 State
  • Relay 12 State
  • Relay 13 State
  • Relay 14 State
  • Relay 15 State
  • Relay 16 State
  • High Time 1
  • High Time 2
  • Raw Count 1
  • Raw Count 2
  • Units
  • Sensor 1 Temp
  • Sensor 2 Temp
  • Sensor 3 Temp
  • Sensor 4 Temp
  • Sensor 1 Alarm
  • Sensor 2 Alarm
  • Sensor 3 Alarm
  • Sensor 4 Alarm
  • Count 1
  • Count 2
  • Extra Variable 1
  • Extra Variable 2
  • Extra Variable 3
  • Extra Variable 4
  • Extra Variable 5
  • Programming Actions
    • Ability to clear memory flag
    • Ability to clear device flag
    • Ability to clear power loss counter

FAQ

What can I use this for?

These products are good for adding additional contacts, relays, temperature sensors and other analog sensors that are not native to Control4.

Why do you only support OS 2.6 and above?
OS 2.6 offers a superior security encryption algorithm and a new and improved driver format. We have decided to only utilise this new format to ensure that the integrity of this driver is not compromised and that we can provide the best dealer/user experience available.

What models will this work for?

We have recently added a universal driver that dynamically creates RELAY and CONTACT_SENSORs as a driver is added to a device. You should be able to access the relay and inputs of all CBW's devices with one of the drivers in this package.  Please speak to us if you are interested in helping us test other models.

Do you offer showroom discounts?
We offer dealers a free showroom licence for demonstration and educational purposes.  See link below for T&C's and signup procedure.

Chowmain Dealer Showroom FAQ

I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90-day trial.  Just add the driverCentral licencing driver and this driver and you're good to go.  No registration required.

Do you offer other drivers?

We have hundreds of drivers.  Many of which are manufacturer sponsored and free.  Please visit our website to view all available drivers including FREE drivers.

http://www.chowmainsoft.com

Version #20221215 - 15-DEC-2022

  • Updated debugging and troubleshooting

Version #20200903 - 03-SEPT-2020

  • Added improved handling of Light to Relay driver

Version #20200312 – 12-MAR-2020

  • Improved process when sending pulse triggers

Version #20191125 – 25-NOV-2019

  • Fixed handling of connections after reboot

Version #20190630 – 30-JUN-2019

  • Added support for WebRelay-Quad devices
  • Fixed issue with continual hour glass when adding the driver to some projects

 Version #20190506 – 06-MAY-2019

  • Added Composer version check code to the universal driver

 Version #20190502 – 01-MAY-2019

  • Updated device polling and Properties tab updating

 Version #20190430 – 30-APR-2019

  • Updated licence handling for the universal driver

Version #20190416 – 16-APR-2019

  • Rolled existing ControlByWeb drivers into one package which includes the Universal driver

 Version #20180831 – 31-AUG-2018

  • Fixed issue affecting visibility of variables

Version #20170710 - 10-JUL-2017

  • Migrated to driverCentral.

Version #20160815 - 15-AUG-2016

  • Added support for the X-332

Version #20160405 - 05-JUL-2016

  • Initial Release