Lists all the different platforms the marketplace supports
Control4 Visual Navigator is a unique driver from Janus Technology that allows you to view and control the state of devices across your entire home from any T3 touch screen!
Utilising Control4's webview technology, Visual Navigator can display the state of all sensors, relays, lights and cameras in your project on a floorplan of your site - while allowing control of all drivers from a familiar interface.
Visual Navigator uses the concept of layers. Each layer corresponds to a distinct set of driver types within your Control4 project (e.g. Sensors, Lighting, Security...).
This product cannot be added to thecart because you are not logged in.
Minimum quantity for "Bticino MyHome" is 1.
Minimum quantity for "RS232/485 to IP" is 1.
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
Features
KNX Utility Generic Monitor enables Control4 to access KNX data. It is designed to be used in conjunction with the Control4 KNX Routing Gateway.
One instance of this driver is to be used for monitoring a datatype (e.g. gas usage, CO2 concentration, water consumption etc) and supports Current Value and Total Consumption fields.
While you can view instantaneous usage and the total consumption you have used so far in the driver’s properties, this driver is ultimately designed to be used alongside BMS Monitor - a unique driver for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data.
This driver brings full support for the wLightBox RGB controller into Control4, with two-way control and feedback, advanced lighting scene availability, and full support for the integrated LiteWave effects via custom commands.
As integrators there are times where we cannot replace ISP provided hardware (eg Cable modem or NBN modem). As such we are reliant on the uptime of these devices and when they go down they take down many of the devices in the home. The Chowmain internet rebooter driver allows reboot of modems, routers, switches, access points and other networking equipment directly from Control4's built in relays.
The idea is that the driver will monitor a specific website periodically and if it fails to retrieve the content from that website multiple times it will execute the reboot sequence. Note that this driver requires wiring of Control4's relays upto the power supplies of the networking equipment.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required.
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised
This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.
Supporting almost all video and audio formats, codecs and file containers, including all modern video standards such as HDMI 2.0, Ultra HD 4K, HDR, 3D subtitles and HEVC video codec with one billion colors (10-Bit color encoding), the Zappiti 4K HDR media player range sets an entirely new standard. The top class Zappiti Duo 4K HDR is equipped with an internal 3.5" SATA HDD bay with hot swap function for huge total capacity (up to 32 TB) and offers powerful Wi-Fi 5G and Ethernet gigabit network capability. The Zappiti 4K HDR media players are compatible with most audio and video formats such as UHD ISO, BD ISO, M2TS, MKV 4K, MVC 3D with 3D subtitles, BD and UHD menus support, home theater audio (including Dolby Atmos and DTS:X) and high-resolution lossless audio files. This new player range is also compatible with Zappiti Video for the best possible home theater experience.
A premium product deserves an excellent interface to match as such the Chowmain Zappiti driver for Control4 offers full library access on all Control4 user interfaces including the Control T3 touchscreen and Neeo remote control.
Put the finishing touch on your customer's Zappiti system using our driver for Control4.
This LIFX LED Wi-Fi Bulb Control4 driver gives you local integration of these lights including:
Looking for a controllable LED light to add to your ELAN project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this ELAN driver.
Looking for a controllable LED light to add to your RTI project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this RTI driver.
Looking for a controllable LED light to add to your Control4 project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this Control4 driver.
JVC LX-UH1 & LX-NZ3 Projector Driver
This driver allows 2-Way RS232 communication with the JVC LX-UH1 & LX-NZ3 projector.
Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.
This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.
Integration into RTI allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using RTI's touchscreens, mobile applications, keypads, handheld remote controls, etc.
This driver is a simple with multiple icons to control a mirror or heated towel rail with a Relay.
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
Hikvision, who is a popular surveillance manufacturer, produce a range of products for both residential and commercial applications. As one of our top requested drivers we felt that we needed to create the ultimate Hikvision driver for Control4.
This driver pushes the integration of Hikvision by offering integration to NVR/DVRs and IP Cameras which allows integrators to push the boundaries of security and home automation. This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.
This IP driver supports the Uprise Smart Shade line of products. It integrates as a native shade and even allows preset recall.
Homemation – Crestron Lighting Driver
This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.
Secondary Drivers:
Homemation Relay Fan Speed Driver
This is used to control a fan via relays.
There are multiple versions of the driver for various speed combinations. Currently supported are:
Integration into URC allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using URC's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
Polyaire manufacture Airtouch4, the new standard in Smart Air Conditioning.
AirTouch can replace your air conditioner's wall controller and lets you control your set point temperature, turn on or off different air conditioning zones, manage airflow and monitor temperatures throughout your house.
With the Chowmain Airtouch4 driver for Control4, you can now integrate the systems and zones managed by the Airtouch4 for seamless operation.
Minimum quantity for "Polyaire Airtouch4" is 1.
These advanced ELAN 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install.
Currently we are providing an 80x80 matrix driver for ELAN. If you only have an 8x8, for example, simply connect the first 8 inputs and outputs.
In addition we have also implemented saving and recalling presets through custom commands.
These advanced Control4 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install. Also supports the FIX matrix.
We're offering drivers in the following sizes to help eliminate extra bindings created by more "generic" versions including:
In addition you can save and recall presets and scenes.
Integration into ELAN allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using ELAN's touchscreens, mobile applications, keypads, handheld remote controls and more.
Kaleidescape presents the world's most authentic cinematic experience with the content you love. Whether on disc or as a digital download from the Kaleidescape Movie Store, Kaleidescape brings together all your movies in a visually stunning library making it beautifully simple to access and enjoy movies that truly matter to you.
A premium product deserves an excellent interface to match as such the Chowmain Kaleidescape driver for URC offers full library access on all URC touchscreens for any IP controlled Kaleidescape system along with an extensive list of automation features that make the integrated experience more rewarding.
This driver will only work on an MRX-15 and above.
Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces, blinds and more!
Integration into Control4 allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
Chowmain is proud to announce Xiaomi Dafang / Wyze Pan / Wyze Cam V2 / Xiaofang 1S / Neos Smart Cam driver for Control4 with Pan/Tilt/Preset functionality and JPEG/H264 based video. This USB powered indoor camera is extremely affordable (starts from $20 USD MSRP) and can be retrofit almost anywhere since it is Wifi based. This is all achieved via the installation of a custom firmware which provides compatibility.
This serial RS232 driver supports the Display Technologies Side Masking Projection Screens. It allows you to easily set the aspect ratio to the following configuration through a device specific command:
The latest version of this driver now also supports up to 20 presets.
Colour Wheel for Control4 is a unique driver from Janus technology providing a sleek, colourful, and intuitive web interface for Control4 RGB, RGBW and Tuneable White (WW) Lighting drivers.
The screen is dominated by the spectacular colour wheel, which allows for the easy control of multiple lighting channels, adapting to type of light controller - RGB, RGBW, WW. There is support for 8 scenes per room, with on-screen visual scene colour indication, and simple selection. The interface complements the existing Control4 lighting screen, and is selectable from any T3 touch screen.
Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.
Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.
Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.
eGauge is an affordable, flexible, secure, web-based electric energy and power meter that can measure up to 30 circuits. It is used to measure and record total building electrical consumption, solar, wind, consumption of individual circuits, such as appliances or geothermal system pumps, and motors.
The Chowmain eGauge driver provides live data feedback from the eGauge unit. This data can be viewed on the Control4 T3 touch screens. The data can be used in Control4’s programming as variables or have a minimum and maximum event trigger set in the driver itself. This provides live automated responses to changes in energy usage.
The Daikin Airbase BRP15B61 lets you control your Daikin ducted or SkyAir system via apps on your phone or tablet. This module is easily can be easily retrofit without installation of new wiring as it is powered by (and communicates via) the Daikin P1 and P2 bus terminals and communicates via wifi.
Thanks to Chowmain the Airbase is now integrated into Control4 for full two way control and feedback over temperature, HVAC mode, setpoint, fan speed and zone control. We have also added additional functionality to the driver to handle presets and scheduling internally.
Setup of hardware and driver should take you no more than 30 minutes once you get the hang of it.
Looking for an inexpensive way to add controllable LED light strips to your Elan project without having an additional "hub" to manage or complicated DMX solution?
Solution: Nexlux Wi-Fi enabled LED strips and this Elan driver.
BenQ provides a standard set of serial based commands that work across their range of projectors.
This driver is based on those commands which allows us to control all BenQ projectors.
Now supporting RGB and RGBW plus Warm White and Cool White Devices!
Looking for an inexpensive way to add controllable LED light strips to your Control4 project without having an additional "hub" to manage or complicated DMX solution?
Solution: Nexlux Wi-Fi enabled LED strips and this Control4 driver.
LIFX (pronounced Life-X) is a line of energy-efficient, multi-color, Wi-Fi enabled LED lighting products that can be controlled via a Wi-Fi equipped device such as a smartphone or smartwatch.
The LIFX driver for Control4 allows for two way control and feedback of all LIFX products including bulbs, strips, beams, tiles and more.
Virgin Media Limited is a British company which provides telephone, television and internet services in the United Kingdom
The Chowmain Virgin Media Channels driver is designed to replace the existing RF_CABLE cloud driver to automatically get the latest channels from Virgin Media including channel numbers, names, icons, currently playing information and more.
Minimum quantity for "Rako Controls" is 1.
Aprilaire Extended Wi-Fi Thermostat driver by Domosapiens with full IAQ control, complete local/remote sensor support and innovative new FLEX Mode for Presets and Schedule. One driver supports the S86WMUPR, 8810, 8820, 8830 and 8840 Aprilaire Home Automation Wi-Fi thermostats.
Minimum quantity for "Clipsal C-Bus" is 1.
The Pushover driver can be used to send and receive notifications from the Pushover service. Notifications can be sent using driver commands with a user settable Title, Message, Sound and destination device. Incoming messages can be used to trigger events in RTI and trigger custom automation.
The received events are the real power in this driver, allowing it to be connected with devices like IFTTT and Zapier enabling RTI to be controlled by 1000's of services that are otherwise unavailable.
The Chowmain Haiku Driver for ELAN allows integration of the Haiku based Big Ass Fans and Big Ass Lights into ELAN allowing full 2 way multispeed fan and multi level lighting control over your home.
Integration into ELAN allows control from a single point using ELAN's touchscreens, mobile applications, keypads and handheld remote controls. On top of that it exposes control over the Haiku products in the ELAN ecosystem to provide interaction from other devices in the home. From turning off your fans and lights when you arm your security system to automatically turning them on when it detects you are at home and if the temperature is at an uncomfortable level integration provides you with so many different solutions to make your lifestyle that much easier.
Sensibo makes your existing air conditioner smart and connected! Sensibo is an external device that you pair your remote controlled air conditioner with. Sensibo will work with the majority of infra-red based HVAC systems whether it is a mini split, window AC, ductless, portable, heat pump and even central air conditioners. The Chowmain driver for Sensibo communicates to Sensibo via the Sensibo Cloud API which enables full two way control and feedback over room temperature, humidity, setpoints, hvac mode, fan speeds and swing.
Chowmain has integrated the range of TP-Link Wifi based Smart Home products into Control4 with two way control and feedback. This provides easy to retrofit solutions for indoor / outdoor smart plug control, power strip control, inwall outlet/switch/dimmer control and also LED bulb/strip control. The hardware is extremely affordable with outlets starting at $24.99, bulbs at $19.99, light switches at $39.99 and power strips at $79.99 MSRP. It definately adds value to any Control4 installation.
Tank Utility manufactures battery operated WiFi devices which monitor propane tank levels. Integrated into Control4 this ensures that your house responds to different levels of propane. This can be used to inform the home owner upon low levels or Control4 can be programmed to turn off unnecessary loads to preserve energy during a power outage.
The Videostorm IRUSB device allows us to control any Android set-top box including the Nvidia Shield, Amazon Fire TV, Foxtel Now, Xiaomi MiBox and more.
The Chowmain IRUSB module is designed to control Android Set-Top Boxes via IP with the help of the Videostorm IRUSB device. This allows you to utilize the URC remotes to navigate the Nvidia Shield box and control applications as you would with a normal Nvidia Shield remote.Note that this driver requires a product called the Videostorm IRUSB be installed along with the associated IRUSB application from Google or Amazon stores (does not require root).
The Chowmain IRUSB driver is designed to control Android Set-Top Boxes via IP with the help of the Videostorm IRUSB device. This allows you to utilize the Control4 SR-260 remote to navigate the Nvidia Shield box and control applications as you would with a normal Nvidia Shield remote.
The driver allows for application launching via mini drivers for individual apps (for the most popular applications) and also expand Control4's infra-red output.
The driver can also detect audio from the Android set-top box and automatically turn the room onto the correct input. Use this with the included Chromecast functionality for the Nvidia Shield, Xiaomi Mibox or Foxtel Now Android TV boxes and you will a fully automated experience with the ability to control the casted control with your SR-260 remote control.Note that this driver requires a product called the Videostorm IRUSB be installed along with the associated IRUSB application from Google or Amazon stores (does not require root).
The Videostorm IRUSB device allows us to control any Android set-top box including the Nvidia Shield, Amazon Fire TV, Foxtel Now and more.
The Chowmain IRUSB driver for ELAN provides IP control over the IRUSB with keyboard text entry, direct app launching, transport controls and more.
It adds additional IR outputs to ELAN by replicating the Global Cache protocol allowing for control over local IR devices via the built-in ELAN Global Cache drivers.
Lastly, it also can detect when audio starts and stops. This is useful for automated selection of the device for Android TV boxes that have Chromecast built-in. Now you can cast YouTube, Netflix or Stan via your mobile phone/tablet or by voice using Google Home and have ELAN automatically select the box as a source with full transport control over the casted content.
Note that this driver requires a product called the Videostorm IRUSB be installed along with the associated IRUSB application from Google or Amazon stores (does not require root).
Chowmain’s Command to Event driver for ELAN allows ELAN programmers to override existing remote control buttons to fire event maps.
This lets the programmers to be more creative in the solutions they provide their customers to add extra functionality.
For example they can make a one way IR bluray driver dim lights when the play, pause or stop buttons are pressed on the remotes.
Another example is that they can assign a hard button to toggle a light on and off or perhaps create a macro to execute a sequence of commands.
Keypad Enhancer by Domosapiens increases your control over keypads, including blinking LEDs and locking-out keypads. It even simulates an 8th keypad button.
WebRelay is an electrical relay (or electrical switch) with a built-in web server. The relay can be turned on, off, or pulsed from this driver. The WebRelay has a long history of reliable operation in many applications including remote reboot, industrial control, security, and remote control and monitoring.
This works great with the Control4 MDU solution to open and sense a main gate or door of a complex.
This driver is specifically for Single Relay & Contact Unit. Model numbers starting with X-WR-1R12 (https://www.controlbyweb.com/webrelay/)