WiZ Wi-Fi RGB LED Lights

MSRP: $90.00
Axon Engineering
Platform:
Version: 1
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

WiZ dimmable color-changing LED bulbs bring the ultimate light experience to your home, office, shop or hospitality business. Retrofit into a multitude of fixtures to create the ambience of your choice. Wi-Fi connected, 16 million colors and adjustable from warm white to daylight.

Looking for a controllable LED light to add to your RTI project without having an additional "hub" to manage or a complicated solution like DMX?

Solution: WiZ Wi-Fi enabled LED bulbs and this RTI driver.

Please note, this purchase is only for the RTI driver and does NOT include the actual LED bulb.

Using our driver you have full control over standard lighting functions like:

  • On/Off/Toggle
  • Dimming
  • RGB control
  • Play a large number preset transitions such as strobes and color changing
  • Program specific colors 
  • White, Warm White, Cool White and even Temperature independent color control

Although we have not tested every single SKU, it should also support the following:

No posts found

Overview

This driver integrates a WiZ Connected Smart Light into RTI. Please ensure the light is connected to the network and operating normally through the app before integrating into the control system. A license is required to use this driver.

Please note the light will not dim below 10 percent. Due to this limitation, the driver will not allow you to set a dim value below 10 percent. Instead, the driver issues an off command to the light.

This driver communicates to the light over a UDP socket. Due to the nature of UDP, commands and response between the light and the driver are not guaranteed. Some commands may need to be sent a second time if the device has poor network connectivity.

IP Connection

The driver communicates to and from the device through an IP connection and must be connected in order for the driver to function.

NOTE: A DHCP reservation is highly recommended for this device so it does not change IP addresses!

Setup

  1. Add the driver to the controller.
  2. Enter the IP Address of the Light into the Device Info section of the configuration.
  3. Upload to controller

Driver Commands

Poll
Fetches the latest device status

Control Dimming
Controls the dim value of the light.

Control Red
Controls the red value of the light.

Control Green
Controls the green value of the light.

Control Blue
Controls the blue value of the light.

Control Warm White
Controls the Warm White value of the light.

Control Cool White
Controls the Cool White value of the light.

Control Temperature
Controls the Temperature value of the light.

Execute Scene
Activates a scene with the exact name.

  • Ocean
  • Romance
  • Sunset
  • Party
  • Fireplace
  • Forest
  • Pastel Colors
  • Wake-up
  • Bedtime
  • Warm White
  • Daylight
  • Cool White
  • Night Light
  • Focus
  • Relax
  • True Colors
  • TV Time
  • Plant Growth
  • Spring
  • Summer
  • Fall
  • Deep Dive
  • Jungle
  • Mojito
  • Club
  • Christmas
  • Halloween

v1

- Initial Release