Relay Fan Speed Controller

MSRP: $100.00
Homemation
30 days
Platform:
Version: 20240202
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

Homemation Relay Fan Speed Driver

This is used to control a fan via relays.

There are multiple versions of the driver for various speed combinations. Currently supported are:

  • 1-Speed (On & Off)
  • 2-Speed (High, Low, Off)
  • 3-Speed (High, Medium, Low, Off)
  • 4-Speed (High, Medium High, Medium Low, Low, Off)

Properties

    • The Relay Control Type can be set to:
      • Pulse, which will the pulse the apropriot relay for the defined times specified in the Pulse/Delay Time properties set in milliseconds.
    • Off Control Type sets what the relays should react when the off command is called.
    • LED Settings are for when you link a keypad to the driver

Connections will vary per model. Here is an example of the 3 Speed Driver:

  • A connection per speed to directly select that speed
  • Cycle Up & Down, increases the speed by one
  • Toggle alternates between the pre-set speed and off

FAQ

  • Do I need a license per fan speed?
    • No, you just need to purchase 1 driver per project
  • I want to try before I buy…
    • No problem, the driver comes with a free 14-day trial

Homemation Relay Fan Speed Driver

This is used to control a fan via relays.

There are multiple versions of the driver for various speed combinations. Currently supported are:

  • 1-Speed (On & Off)
  • 2-Speed (High, Low, Off)
  • 3-Speed (High, Medium, Low, Off)
  • 4-Speed (High, Medium High, Medium Low, Low, Off)

Properties

    • The Relay Control Type can be set to:
      • Pulse, which will the pulse the apropriot relay for the defined times specified in the Pulse/Delay Time properties set in milliseconds.
    • Off Control Type sets what the relays should react when the off command is called.
    • LED Settings are for when you link a keypad to the driver

Connections will vary per model. Here is an example of the 3 Speed Driver:

  • A connection per speed to directly select that speed
  • Cycle Up & Down, increases the speed by one
  • Toggle alternates between the pre-set speed and off

FAQ

  • Do I need a license per fan speed?
    • No, you just need to purchase 1 driver per project
  • I want to try before I buy…
    • No problem, the driver comes with a free 14-day trial

Changelog

  • Version 20240202
    • Modernized the code to newer practices for future maintenance.
    • Added the “Sequential” control type.
  • Version 20200121
    • Merged all the drivers into a common code base
    • Optimized the code
    • Added feedback so that if the relays are changed outside of Control4 it should update the C4 navigator
    • Corrected a connection that was missing on the 4 Speed Controller
  • Version 20191202
    • Initial Release