Lists all the different platforms the marketplace supports
Tank Utility manufactures battery operated WiFi devices which monitor propane tank levels. Integrated into Control4 this ensures that your house responds to different levels of propane. This can be used to inform the home owner upon low levels or Control4 can be programmed to turn off unnecessary loads to preserve energy during a power outage.
This product cannot be added to thecart because you are not logged in.
Want to control the Amazon Fire TV, Chromecast with Google TV, Nvidia Shield, Xiaomi Mibox, AirTV and more? The Chowmain Android TV driver is designed to control Google Android TV boxes. It is a software only solution so no extra hardware required.
This allows you to navigate the Android operating system and control applications as you would with a normal infra red remote control. No need to root the device and no need to install any additional hardware.
The KNX Coloured Lighting driver supports all datapoint types that could be used for coloured light fixtures (RGB/RGBW and Tunable White), displaying common and familiar control interface for the end user and providing compatibility with our Colour Wheel and Circadian Rythmn drivers
Vivotek manufacturers a range of PTZ and NON PTZ based IP cameras for a range of applications including residential and commercial.
Chowmain is proud to announce Vivotek IP Camera integration with Pan/Tilt/Zoom functionality and JPEG/MJPEG/H264 based video.
Want to control the Chromecast with Google TV, Nvidia Shield, Xiaomi Mibox, AirTV and more? The Chowmain Android TV driver is designed to control Google Android TV boxes. It is a software only solution so no extra hardware required. This allows you to utilise the ELAN’s viewer and HR remotes to navigate the Android operating system and control applications as you would with a normal infra red remote control. No need to root the device and no need to install any additional hardware.
Minimum quantity for "Connector Blind RF433Mhz and Dooya Bridge" is 1.
Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.
This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.
Integration into RTI allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using RTI's touchscreens, mobile applications, keypads, handheld remote controls, etc.
Integration into URC allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using URC's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
Looking for an inexpensive way to add controllable LED light strips to your Elan project without having an additional "hub" to manage or complicated DMX solution?
Solution: Nexlux Wi-Fi enabled LED strips and this Elan driver.
WebRelay is an electrical relay (or electrical switch) with a built-in web server. The relay can be turned on, off, or pulsed from this driver. The WebRelay has a long history of reliable operation in many applications including remote reboot, industrial control, security, and remote control and monitoring.
This works great with the Control4 MDU solution to open and sense a main gate or door of a complex.
This driver is specifically for Single Relay & Contact Unit. Model numbers starting with X-WR-1R12 (https://www.controlbyweb.com/webrelay/)
The SainSmart iMatic V2 provides 8 x 250V/AC 10A Relays channels that is controlled over ethernet TCP/IP. This unit is extremely affordable, is powered via a local 12vdc supply and is also din mountable. Other solutions cost anywhere from 3 times to 10 times more. This is by far the cheapest way to integrate relays into Control4.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
Polyaire manufacture Airtouch4, the new standard in Smart Air Conditioning.
AirTouch can replace your air conditioner's wall controller and lets you control your set point temperature, turn on or off different air conditioning zones, manage airflow and monitor temperatures throughout your house.
With the Chowmain Airtouch4 driver for Control4, you can now integrate the systems and zones managed by the Airtouch4 for seamless operation.
Minimum quantity for "Polyaire Airtouch4" is 1.
KNX Utility Generic Monitor enables Control4 to access KNX data. It is designed to be used in conjunction with the Control4 KNX Routing Gateway.
One instance of this driver is to be used for monitoring a datatype (e.g. gas usage, CO2 concentration, water consumption etc) and supports Current Value and Total Consumption fields.
While you can view instantaneous usage and the total consumption you have used so far in the driver’s properties, this driver is ultimately designed to be used alongside BMS Monitor - a unique driver for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data.
Sensibo makes your existing air conditioner smart and connected! Sensibo is an external device that you pair your remote controlled air conditioner with. Sensibo will work with the majority of infra-red based HVAC systems whether it is a mini split, window AC, ductless, portable, heat pump and even central air conditioners. The Chowmain driver for Sensibo communicates to Sensibo via the Sensibo Cloud API which enables full two way control and feedback over room temperature, humidity, setpoints, hvac mode, fan speeds and swing.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
Virgin Media Limited is a British company which provides telephone, television and internet services in the United Kingdom
The Chowmain Virgin Media Channels driver is designed to replace the existing RF_CABLE cloud driver to automatically get the latest channels from Virgin Media including channel numbers, names, icons, currently playing information and more.
This LIFX LED Wi-Fi Bulb Control4 driver gives you local integration of these lights including:
The Pushover driver can be used to send and receive notifications from the Pushover service. Notifications can be sent using driver commands with a user settable Title, Message, Sound and destination device. Incoming messages can be used to trigger events in RTI and trigger custom automation.
The received events are the real power in this driver, allowing it to be connected with devices like IFTTT and Zapier enabling RTI to be controlled by 1000's of services that are otherwise unavailable.
Command seamless Streamers with LinkPlay embebed as Arylic and Hall Audio and dozens of regional solutions With these drivers you can stream music using Control4, call presets, make multiroom music seamless Supports Streams (LinkPlay App – WiiM Home is required to use Deezer, Tidal, Amazon Music, Napster, Tunein, etc) For Spotify., use directly Spotify App sending Spotify Connect. The result will be very Similar with Control4 Native Streaming.
Control4 sessions will join zones using several devices (up to eight) over IP network Room will turn on Control4 on the same way using Control4 Connect with Spotify. These affordable devices are a great option to budgets projects, make a great sound with minor investment
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
These advanced Control4 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install. Also supports the FIX matrix.
We're offering drivers in the following sizes to help eliminate extra bindings created by more "generic" versions including:
In addition you can save and recall presets and scenes.
This driver is used to receives readings locally, via IP (Wi-Fi or Wired), for the Victron GX MQTT service. It is ALSO a “Webview” driver allowing you to use T3 or T4 Touchscreens to view the GX web interface.
Tested on the Cerbo GX, Color Control GX & Venus GX.
This driver is a simple with multiple icons to control a mirror or heated towel rail with a Relay.
Features
This serial RS232 driver supports the Display Technologies Side Masking Projection Screens. It allows you to easily set the aspect ratio to the following configuration through a device specific command:
The latest version of this driver now also supports up to 20 presets.
The Chowmain Haiku Driver for ELAN allows integration of the Haiku based Big Ass Fans and Big Ass Lights into ELAN allowing full 2 way multispeed fan and multi level lighting control over your home.
Integration into ELAN allows control from a single point using ELAN's touchscreens, mobile applications, keypads and handheld remote controls. On top of that it exposes control over the Haiku products in the ELAN ecosystem to provide interaction from other devices in the home. From turning off your fans and lights when you arm your security system to automatically turning them on when it detects you are at home and if the temperature is at an uncomfortable level integration provides you with so many different solutions to make your lifestyle that much easier.
Epson provides a universal API (ESC/VP21) for their range of projectors for both IP and RS232 based controls.
The Chowmain Epson universal projector driver for Control4 provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.
Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required.
Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.
Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.
Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.
This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.
Integrate Hikvision Face Recognition TerminalsWhis this driver you are able to:Open Door connect on readersReceive events of:User identified (one event for user on programming tab)Users not recognizedTerminal door bellTerminal Contact Sensors
As integrators there are times where we cannot replace ISP provided hardware (eg Cable modem or NBN modem). As such we are reliant on the uptime of these devices and when they go down they take down many of the devices in the home. The Chowmain internet rebooter driver allows reboot of modems, routers, switches, access points and other networking equipment directly from Control4's built in relays.
The idea is that the driver will monitor a specific website periodically and if it fails to retrieve the content from that website multiple times it will execute the reboot sequence. Note that this driver requires wiring of Control4's relays upto the power supplies of the networking equipment.
Tinycontrol offer budget IP controlled rack mount power control for the EU market. Chowmain have created a Control4 driver to control the range of IP power sockets made by Tinycontrol.
MSRP: $80 USD
Chowmain’s Command to Event driver for ELAN allows ELAN programmers to override existing remote control buttons to fire event maps.
This lets the programmers to be more creative in the solutions they provide their customers to add extra functionality.
For example they can make a one way IR bluray driver dim lights when the play, pause or stop buttons are pressed on the remotes.
Another example is that they can assign a hard button to toggle a light on and off or perhaps create a macro to execute a sequence of commands.
Homemation Relay Fan Speed Driver
This is used to control a fan via relays.
There are multiple versions of the driver for various speed combinations. Currently supported are:
Many Jewish people who strictly observe Shabbat refrain from what turning electricity on or off during this period. They may also refrain from making adjustments to the intensity of electrical appliances.
The Chowmain Hebcal module for URC imports data from Hebcal.com. This module helps by automating detection of Jewish holidays and your standard Shabbat (observed from a few minutes before sunset on Friday evening until the appearance of three stars in the sky on Saturday night). By firing these events it assists with notification of Candle lighting (18 minutes before sundown) and Havdalah (after the appearance of three stars in the sky) along with the automation of electronic devices during this period.
Looking for a controllable LED light to add to your RTI project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this RTI driver.
4Drivers has driver to make a seamless integration with tese Biometric readers You can: Import all users Choose actions for each one Open relay if connected to solution Try this easy integration and robust solution on you project
Minimum quantity for "Rako Controls" is 1.
Looking for a controllable LED light to add to your ELAN project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this ELAN driver.
Control Polk Audio xrt12 XM Radio Tuner via RS232 in Control4
Minimum quantity for "Clipsal C-Bus" is 1.
This driver brings full support for the wLightBox RGB controller into Control4, with two-way control and feedback, advanced lighting scene availability, and full support for the integrated LiteWave effects via custom commands.
LIfeSmart Integration with Control4 Uses Lighting Modules, cube sensors on an affordable solution now with Control4With this set of drivers some Yale Lock can integrate using regular ZigBee cardsOn our development scenario we connected a YDF-40 lock easily. You can open/close and users will fire event when access the lock Instruction videos coming soon
Futhermore, LifeSmart Scenes will fire events on Control4.
