Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces, blinds and more!
This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.
Integration into Control4 allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
This product cannot be added to thecart because you are not logged in.
Chowmain has integrated the range of TP-Link Wifi based Smart Home products into Control4 with two way control and feedback. This provides easy to retrofit solutions for indoor / outdoor smart plug control, power strip control, inwall outlet/switch/dimmer control and also LED bulb/strip control. The hardware is extremely affordable with outlets starting at $24.99, bulbs at $19.99, light switches at $39.99 and power strips at $79.99 MSRP. It definately adds value to any Control4 installation.
Colour Wheel for Control4 is a unique driver from Janus technology providing a sleek, colourful, and intuitive web interface for Control4 RGB, RGBW and Tuneable White (WW) Lighting drivers.
The screen is dominated by the spectacular colour wheel, which allows for the easy control of multiple lighting channels, adapting to type of light controller - RGB, RGBW, WW. There is support for 8 scenes per room, with on-screen visual scene colour indication, and simple selection. The interface complements the existing Control4 lighting screen, and is selectable from any T3 touch screen.
Now supporting RGB and RGBW plus Warm White and Cool White Devices!
Looking for an inexpensive way to add controllable LED light strips to your Control4 project without having an additional "hub" to manage or complicated DMX solution?
Solution: Nexlux Wi-Fi enabled LED strips and this Control4 driver.
*** SUPPORTS OS 2.8*** The Omni and Lumina control systems from HAI (now Leviton) provide comprehensive security, energy management and sophisticated lighting control. For more details on the Omni systems, please go to the Leviton website for Omni Security Systems.
The Domosapiens driver for these systems communicates over Ethernet IP and provides enhanced features and reliability.
Looking for a controllable LED light to add to your Control4 project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this Control4 driver.
Homemation Occupancy DriverThis driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.Features
Homemation – Crestron Lighting Driver
This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.
Secondary Drivers:
Control4 Visual Navigator is a unique driver from Janus Technology that allows you to view and control the state of devices across your entire home from any T3 touch screen!
Utilising Control4's webview technology, Visual Navigator can display the state of all sensors, relays, lights and cameras in your project on a floorplan of your site - while allowing control of all drivers from a familiar interface.
Visual Navigator uses the concept of layers. Each layer corresponds to a distinct set of driver types within your Control4 project (e.g. Sensors, Lighting, Security...).
LIFX (pronounced Life-X) is a line of energy-efficient, multi-color, Wi-Fi enabled LED lighting products that can be controlled via a Wi-Fi equipped device such as a smartphone or smartwatch.
The LIFX driver for Control4 allows for two way control and feedback of all LIFX products including bulbs, strips, beams, tiles and more.
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
Minimum quantity for "Bticino MyHome" is 1.
The KNX Coloured Lighting driver supports all datapoint types that could be used for coloured light fixtures (RGB/RGBW and Tunable White), displaying common and familiar control interface for the end user and providing compatibility with our Colour Wheel and Circadian Rythmn drivers
The SainSmart iMatic V2 provides 8 x 250V/AC 10A Relays channels that is controlled over ethernet TCP/IP. This unit is extremely affordable, is powered via a local 12vdc supply and is also din mountable. Other solutions cost anywhere from 3 times to 10 times more. This is by far the cheapest way to integrate relays into Control4.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
This LIFX LED Wi-Fi Bulb Control4 driver gives you local integration of these lights including:
Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.
Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.
Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.
This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.
Features
This driver brings full support for the wLightBox RGB controller into Control4, with two-way control and feedback, advanced lighting scene availability, and full support for the integrated LiteWave effects via custom commands.
LIfeSmart Integration with Control4 Uses Lighting Modules, cube sensors on an affordable solution now with Control4With this set of drivers some Yale Lock can integrate using regular ZigBee cardsOn our development scenario we connected a YDF-40 lock easily. You can open/close and users will fire event when access the lock Instruction videos coming soon
Futhermore, LifeSmart Scenes will fire events on Control4.
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
A Control4 Ethernet driver for the Nicolaudie STICK DE3 DMX lighting controllers. The driver includes controls for adjusting brightness and RGB colour levels, as well as recalling scenes saved on the STICK controller.
The STICK DE3 is a state-of-the-art DMX sequencer, capable of complex dynamic scenes, and stunning colour chases; integration with the Control4 takes it to the next level. This driver is also fully compatible with Colour Wheel, allowing for a sleek and intuitive end user experience.
FREE Control4 drivers for the Axion Lighting DMX Controller. The only DMX controller specifically designed around the Custom Integration market as well as designed and manufactured in the USA!
The Collingwood TR2818 Wifi-to-RF transmitter is designed to provide easy control of up to 8 zones of RGB, RGBW or CT (colour temperature) lighting.
Using this with the C100924 RGB & RGBW controller removes the need for complicated DMX systems, with multi-zone colour change easily achievable.
This driver suite brings compatibility for these systems into Control4, with built-in support for the zone-learning setup process, scene save & recall functionality, and custom commands allowing for 10 unique run modes.
This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.
Properties
Connections
FAQ
This Control4 driver integrates the Philips Hue HDMI Sync Box into your smart home.
Sync your Philips Hue smart lights to the content on your TV screen - now fully controllable through Control4.
Minimum quantity for "Bticino Living Now and MyHomeSever1" is 1.
This suite of drivers enables bi-directional integration of a Niko Home Control system with Control4
(Proluxe by) American Lighting is dedicated to providing top-quality lighting for smart home integration. Now fully compatible with Control4, the award winning Spektrum+ Smart Lighting System gives users the power to paint their home in color and light, all with the touch of a button. Light up your home with RGBW and RGB+TW downlights, tape lights, neon strip lights, outdoor landscape and sconce lights, as well as smart bulbs in standard lamp sizes like A19 and BR30. With the Spektrum+ Gateway-E, use Control4 to create schedules, make custom programs, and control everything from color selection to brightness.