Platforms

Epson provides a universal API (ESC/VP21) for their range of projectors for both IP and RS232 based controls.

The Chowmain Epson universal projector driver for Control4 provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.

Epson provides a universal API (ESC/VP21) for their range of projectors for both IP and RS232 based controls.

The Chowmain Epson universal projector driver for ELAN provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.

Epson provides a universal API (ESC/VP21) for their range of projectors for both IP and RS232 based controls.

The Chowmain Epson universal projector driver for RTI provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.

Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.

The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.

It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!

The Chowmain M1 driver for Control4 offers extensive integration of the M1 functionality to truely expand Control4's functionality to not only security based services but also occupancy and input/output expansion for automation tasks and is compatible with both Ness and ELK M1 systems.

eGauge is an affordable, flexible, secure, web-based electric energy and power meter that can measure up to 30 circuits. It is used to measure and record total building electrical consumption, solar, wind, consumption of individual circuits, such as appliances or geothermal system pumps, and motors.

The Chowmain eGauge driver provides live data feedback from the eGauge unit. This data can be viewed on the Control4 T3 touch screens. The data can be used in Control4’s programming as variables or have a minimum and maximum event trigger set in the driver itself. This provides live automated responses to changes in energy usage.

The Chowmain Echonet Lite driver opens Control4 integration into any Echonet Lite enabled Home Air Conditioner unit. Popular manufacturer's such as Mitsubishi, Panasonic, Fujitsu, Toshiba, Daikin and more already adopt the Echonet Lite protocol.

Homemation Occupancy Driver

This driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.

Features

• Ramp dimmers to a pre-set level on Occupancy
• Set an Occupancy Timeout of 1 minute to 1 hour
• Turn a rooms AV off when Occupancy Timeout is reached
• Control Thermostats based on Occupancy
  • This was tested & works well with the Chowmain Intesis Driver but should work with all Thermostat Drivers
• Enable or disable the Occupancy via UI Button on a Navigator
• Enable, Disable or Toggle the driver with a Keypad with LED feedback
• A separate but FREE Occupancy Controller driver to update multiple Occupancy Drivers simultaneously from programming

This serial RS232 driver supports the Display Technologies Side Masking Projection Screens. It allows you to easily set the aspect ratio to the following configuration through a device specific command:

• 4:3
• 16:9
• 2.00:1
• 2.35:1
• 2.37:1

The latest version of this driver now also supports up to 20 presets.

This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.

Features

• Quickly select the lighting driver from System Design
• Quickly bind the Relay outputs to the Relay Driver you need to control
• If the light is dimmed on via the light icon on a navigator this will reflect on the relay driver
• If the relay device is triggered the commands are routed to the lighting device

Project validation, error testing, dealer contact and controller monitoring tools for Control4.

The Daikin Airbase BRP15B61 lets you control your Daikin ducted or SkyAir system via apps on your phone or tablet.  This module is easily can be easily retrofit without installation of new wiring as it is powered by (and communicates via) the Daikin P1 and P2 bus terminals and communicates via wifi.

Thanks to Chowmain the Airbase is now integrated into Control4 for full two way control and feedback over  temperature, HVAC mode, setpoint, fan speed and zone control.  We have also added additional functionality to the driver to handle presets and scheduling internally.

Setup of hardware and driver should take you no more than 30 minutes once you get the hang of it.

Dahua, who is a popular surveillance manufacturer, produce a range of PTZ and NON PTZ based IP cameras for a range of residential and commercial applications along with network video recorders (NVRs). As one of our top requested drivers we felt that we needed to create the ultimate Dahua driver for Control4.  We have worked closely with Dahua to ensure that the integration provides the best user experience possible.  This driver pushes the integration of Dahua by offering functionality that allows the cameras to push the boundaries of security and home automation.  This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.

Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.

Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.

Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.

Homemation – Crestron Lighting Driver

This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.

Secondary Drivers: 

• To add dimmable lighting loads to the system, use the "HM Dimmable Light" driver.

• To add switched lighting loads to the system, use the "HM Non Dimmable Light" driver.

• To use a relay with non-lighting loads, use the “HM Relay Interface” Driver which allows you to connect a Control4 Relay Driver so that it reflects in the correct place on a Navigator.

• To use a keypad button from Crestron within Control4 you can use the “HM Keypad” Driver. Each button requires an address from Crestron. You can then bind these in connections or use them in programming.

4Drivers has driver to make a seamless integration with tese Biometric readers

You can:
Import all users
Choose actions for each one
Open relay if connected to solution

Try this easy integration and robust solution on you project

ControlByWeb manufactuer IP enabled inputs, sensors & outputs. Integration into Control4 enables Control4 to monitor and control these inputs and outputs

MSRP: $100 USD

The Contact Us webview driver for Control4 provides dealers with a professional looking contact us page on the T3 touchscreen with customisable company logo, company contact details, google map and clickable URL to the company website.

This adds the final touch to a professionally installed system and provides dealers with a cheap way of marketing their company to people who utilise the touchscreen.

This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.

Features

• Quickly bind the contact connection
• Quickly bind the corresponding keypad connection to a device (like the Toggle of a light)
• Should mimic a keypad button press including the push and hold to dim a light.
• Contact Connection 1 is linked to Keypad Connection 1, and so on…

Properties

• Device Settings
  • Click Rate: This is where you set the click rate to differentiate from a quick click (single tap) or a longer push and hold

Connections

• • 20 Contacts Inputs: This is where you will bind the driver to devices like the contact on a controller, IO Extender, Z2IO or Z2C (or similar)
  • 20 Keypad Inputs: This is where you will bind the driver to a device like you would a keypad button

FAQ

• Can you give us some examples of how we could use this driver?
  • We have had some requests were an old, centralised lighting system is being changed and need to use existing switchgear. This allows for pulse, press, release inputs to a contact so that the existing switchgear acts as if it were a keypad button
• Can you have more than one Driver per project?
  • Sure can.
• Can you bind multiple connections to a contact connection?
  • Nope.
• Can you bind multiple connections to a keypad connection?
  • Nope.
• What if I have 2 buttons that need to control one light
  • You can bind the one contact to a connection and then connect to other to another contact connection. The corresponding keypad connections can both be bound to the toggle connection of the light.
• I want to try before I buy…
  • No problem, the driver comes with a free 15-day trial

Enables you to manage the state of Control4 Contact Sensors via programming.  This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.

Chowmain’s Command to Event driver for ELAN allows ELAN programmers to override existing remote control buttons to fire event maps.

This lets the programmers to be more creative in the solutions they provide their customers to add extra functionality.

For example they can make a one way IR bluray driver dim lights when the play, pause or stop buttons are pressed on the remotes.

Another example is that they can assign a hard button to toggle a light on and off or perhaps create a macro to execute a sequence of commands.

Colour Wheel for Control4 is a unique driver from Janus technology providing a sleek, colourful, and intuitive web interface for Control4 RGB, RGBW and Tuneable White (WW) Lighting drivers.

The screen is dominated by the spectacular colour wheel, which allows for the easy control of multiple lighting channels, adapting to type of light controller - RGB, RGBW, WW. There is support for 8 scenes per room, with on-screen visual scene colour indication, and simple selection. The interface complements the existing Control4 lighting screen, and is selectable from any T3 touch screen.

The Collingwood TR2818 Wifi-to-RF transmitter is designed to provide easy control of up to 8 zones of RGB, RGBW or CT (colour temperature) lighting.

Using this with the C100924 RGB & RGBW controller removes the need for complicated DMX systems, with multi-zone colour change easily achievable.

This driver suite brings compatibility for these systems into Control4, with built-in support for the zone-learning setup process, scene save & recall functionality, and custom commands allowing for 10 unique run modes.