This product cannot be added to thecart because you are not logged in.
The Advanced Custom Buttons app for Control4 Infinity Edge 5 inch, 7 inch touch panels and MyHome PC features upto 12 custom buttons with dynamic labeling of buttons through the Control4 programming tab and LED feedback for button state.
MSRP: $90 USD
APC’s Switched PDU’s allow you to control the power of devices in your customer’s rack. This is extremely useful for energy saving and remote troubleshooting. Integration into Control4 enables Control4 to do emergency shutdowns on low or high voltage levels or if the total power consumption is exceeding or lower than expected. This ensures that the health of your customer’s rack based equipment is maintained.
ControlByWeb manufactuer IP enabled inputs, sensors & outputs. Integration into Control4 enables Control4 to monitor and control these inputs and outputs
MSRP: $100 USD
Add Geofencing, Google Home, Amazon Echo, SMS, Phone Calls, Push Notifications and more to Control4 via Chowmain's bi-directional IFTTT Maker Driver.
The SainSmart iMatic V2 provides 8 x 250V/AC 10A Relays channels that is controlled over ethernet TCP/IP. This unit is extremely affordable, is powered via a local 12vdc supply and is also din mountable. Other solutions cost anywhere from 3 times to 10 times more. This is by far the cheapest way to integrate relays into Control4.
Tinycontrol offer budget IP controlled rack mount power control for the EU market. Chowmain have created a Control4 driver to control the range of IP power sockets made by Tinycontrol.
MSRP: $80 USD
The Contact Us webview driver for Control4 provides dealers with a professional looking contact us page on the T3 touchscreen with customisable company logo, company contact details, google map and clickable URL to the company website.
This adds the final touch to a professionally installed system and provides dealers with a cheap way of marketing their company to people who utilise the touchscreen.
The Scheduler webview driver for Control4 provides end users with the ability to schedule pre-setup presets/macros via the T3 touchscreen.
We have designed the scheduler to look, feel and operate in a similar manner to the Control4 thermostat scheduler. You can setup a repeating schedule which will repeat on a weekly basis or setup a one off schedule that will only operate once and will remove or disable itself after it executes.
Homemation Occupancy DriverThis driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.Features
This driver is built specifically for those Muslim Control4 home owners who want to program their home for adhan (or azan) - the call to prayer which happens 5 times a day.
This driver will utilise latitude and longitude co-ordinates along with the timezone to return the prayer times to Control4 from the aladhan website.
We also expose a few other events that are significant.
WebRelay is an electrical relay (or electrical switch) with a built-in web server. The relay can be turned on, off, or pulsed from this driver. The WebRelay has a long history of reliable operation in many applications including remote reboot, industrial control, security, and remote control and monitoring.
This works great with the Control4 MDU solution to open and sense a main gate or door of a complex.
This driver is specifically for Single Relay & Contact Unit. Model numbers starting with X-WR-1R12 (https://www.controlbyweb.com/webrelay/)
Keypad Enhancer by Domosapiens increases your control over keypads, including blinking LEDs and locking-out keypads. It even simulates an 8th keypad button.
Tank Utility manufactures battery operated WiFi devices which monitor propane tank levels. Integrated into Control4 this ensures that your house responds to different levels of propane. This can be used to inform the home owner upon low levels or Control4 can be programmed to turn off unnecessary loads to preserve energy during a power outage.
Chowmain has integrated the range of TP-Link Wifi based Smart Home products into Control4 with two way control and feedback. This provides easy to retrofit solutions for indoor / outdoor smart plug control, power strip control, inwall outlet/switch/dimmer control and also LED bulb/strip control. The hardware is extremely affordable with outlets starting at $24.99, bulbs at $19.99, light switches at $39.99 and power strips at $79.99 MSRP. It definately adds value to any Control4 installation.
eGauge is an affordable, flexible, secure, web-based electric energy and power meter that can measure up to 30 circuits. It is used to measure and record total building electrical consumption, solar, wind, consumption of individual circuits, such as appliances or geothermal system pumps, and motors.
The Chowmain eGauge driver provides live data feedback from the eGauge unit. This data can be viewed on the Control4 T3 touch screens. The data can be used in Control4’s programming as variables or have a minimum and maximum event trigger set in the driver itself. This provides live automated responses to changes in energy usage.
Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.
Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.
Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.
Features
Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised