Thor RF11 R Smart Guard Remote 11

MSRP: $80.00
Chowmain LTD
Version: 20210119
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


The Thor SmartBrain not only protects from surges, it also filters and cleans electrical frequency noise. The filter works both ways. Stopping noise from robbing equipment performance as well as connected devices' noise contaminating power.

SmartBrain entry level filter is a passive technology. Managing to cover a wider range of shielding to like competitors by “cleaning” a wider range of unwanted frequency noise. The filter works both ways. Stopping noise from robbing equipment performance as well as connected devices’ noise contaminating power.

The Thor Smart Guard Remote 11 driver for Control4 allows integration of the Smart Guard Remote 11 including monitoring and control over the two controlled circuits with feedback on circuit health.


Control & Feedback

  • Circuit 1 – 7 x AS/NZS 3112 sockets
  • Circuit 2 – 4 x IEC sockets

Beeper control

  • Circuit 1 – Enable or Disable
  • Circuit 2 – Enable or Disable

Events Triggered on

  • Circuit 1 Damaged
  • Circuit 1 Back to Nominal State
  • Circuit 2 Damaged
  • Circuit 2 Back to Nominal State
  • Circuit 1 Turned On
  • Circuit 1 Turned Off
  • Circuit 2 Turned On
  • Circuit 2 Turned Off
  • Alarm Starting to Buzz
  • Alarm Stopped Buzzing

Programming Actions

  • Turn Circuit 1 On
  • Turn Circuit 2 On
  • Turn Circuit 1 Off
  • Turn Circuit 2 Off


  • Circuit 1 Relay
  • Circuit 2 Relay


What can i use this for?

  • Automatically power on or off power amps and other AV equipment when Control4 requires them.
  • Automatically power off equipment when high or low amps is detected.
  • Power cycle a device through Control4's navigator interface.
  • Turn off all un-neccesary equipment when the security system is armed. Turn them back on when the security system is disarmed.
  • Automatically reboot a device if it is locked up (requires Chowmain ping driver)
  • Report damaged circuits and alarms

Why do you only support OS 2.6 and above?
OS 2.6 offers a superior security encryption algorithm and a new and improved driver format. We have decided to only utilise this new format to ensure that the integrity of this driver is not compromised and that we can provide the best dealer/user experience available.

What models will this work for?

This driver will work for the RF11 R model of PDU.  It may work for future models of PDU however we recommend that you utilise the trial built into the driver out prior to purchasing a licence.

Do you offer showroom discounts?
We offer dealers a free showroom licence for demonstration and educational purposes.  See link below for T&C's and signup procedure.

Chowmain Dealer Showroom FAQ

I want to try this driver out before buying it?
All Chowmain drivers for Control4 come with a 90 day trial.  Just add the driverCentral licencing driver and this driver and you're good to go.  No registration required.

Version #20210119 - 19-JAN-2021
* Updated to new Driver Central licensing

Version #20170710 - 10-JUL-2017
* Migrated to driverCentral.

Version #20170508 - 08-MAY-2017
* Initial Release