Lists all the different platforms the marketplace supports
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
This product cannot be added to thecart because you are not logged in.
Monitor temperatures and get notified easily when the temperature of that area or device goes above/below a custom set point
The Collingwood TR2818 Wifi-to-RF transmitter is designed to provide easy control of up to 8 zones of RGB, RGBW or CT (colour temperature) lighting.
Using this with the C100924 RGB & RGBW controller removes the need for complicated DMX systems, with multi-zone colour change easily achievable.
This driver suite brings compatibility for these systems into Control4, with built-in support for the zone-learning setup process, scene save & recall functionality, and custom commands allowing for 10 unique run modes.
Colour Wheel for Control4 is a unique driver from Janus technology providing a sleek, colourful, and intuitive web interface for Control4 RGB, RGBW and Tuneable White (WW) Lighting drivers.
The screen is dominated by the spectacular colour wheel, which allows for the easy control of multiple lighting channels, adapting to type of light controller - RGB, RGBW, WW. There is support for 8 scenes per room, with on-screen visual scene colour indication, and simple selection. The interface complements the existing Control4 lighting screen, and is selectable from any T3 touch screen.
Minimum quantity for "Connector Blind RF433Mhz and Dooya Bridge" is 1.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.
Features
Properties
Connections
FAQ
4Drivers has driver to make a seamless integration with tese Biometric readers You can: Import all users Choose actions for each one Open relay if connected to solution Try this easy integration and robust solution on you project
Homemation – Crestron Lighting Driver
This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.
Secondary Drivers:
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
This serial RS232 driver supports the Display Technologies Side Masking Projection Screens. It allows you to easily set the aspect ratio to the following configuration through a device specific command:
The latest version of this driver now also supports up to 20 presets.
Homemation Occupancy DriverThis driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.Features
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
The YATUN driver suite exposes various Number Variable input connections in its drivers.
This generic monitor can be used to connect to these connections, enabling compatibility of all Number Variable connections in the YATUN driver suite with BMS Monitor.
