Lists all the different platforms the marketplace supports
Tank Utility manufactures battery operated WiFi devices which monitor propane tank levels. Integrated into Control4 this ensures that your house responds to different levels of propane. This can be used to inform the home owner upon low levels or Control4 can be programmed to turn off unnecessary loads to preserve energy during a power outage.
This product cannot be added to thecart because you are not logged in.
Want to control the Amazon Fire TV, Chromecast with Google TV, Nvidia Shield, Xiaomi Mibox, AirTV and more? The Chowmain Android TV driver is designed to control Google Android TV boxes. It is a software only solution so no extra hardware required.
This allows you to navigate the Android operating system and control applications as you would with a normal infra red remote control. No need to root the device and no need to install any additional hardware.
The KNX Coloured Lighting driver supports all datapoint types that could be used for coloured light fixtures (RGB/RGBW and Tunable White), displaying common and familiar control interface for the end user and providing compatibility with our Colour Wheel and Circadian Rythmn drivers
Vivotek manufacturers a range of PTZ and NON PTZ based IP cameras for a range of applications including residential and commercial.
Chowmain is proud to announce Vivotek IP Camera integration with Pan/Tilt/Zoom functionality and JPEG/MJPEG/H264 based video.
Want to control the Chromecast with Google TV, Nvidia Shield, Xiaomi Mibox, AirTV and more? The Chowmain Android TV driver is designed to control Google Android TV boxes. It is a software only solution so no extra hardware required. This allows you to utilise the ELAN’s viewer and HR remotes to navigate the Android operating system and control applications as you would with a normal infra red remote control. No need to root the device and no need to install any additional hardware.
Minimum quantity for "Connector Blind RF433Mhz and Dooya Bridge" is 1.
Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.
This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.
Integration into RTI allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using RTI's touchscreens, mobile applications, keypads, handheld remote controls, etc.
Integration into URC allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using URC's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
Looking for an inexpensive way to add controllable LED light strips to your Elan project without having an additional "hub" to manage or complicated DMX solution?
Solution: Nexlux Wi-Fi enabled LED strips and this Elan driver.
WebRelay is an electrical relay (or electrical switch) with a built-in web server. The relay can be turned on, off, or pulsed from this driver. The WebRelay has a long history of reliable operation in many applications including remote reboot, industrial control, security, and remote control and monitoring.
This works great with the Control4 MDU solution to open and sense a main gate or door of a complex.
This driver is specifically for Single Relay & Contact Unit. Model numbers starting with X-WR-1R12 (https://www.controlbyweb.com/webrelay/)
The SainSmart iMatic V2 provides 8 x 250V/AC 10A Relays channels that is controlled over ethernet TCP/IP. This unit is extremely affordable, is powered via a local 12vdc supply and is also din mountable. Other solutions cost anywhere from 3 times to 10 times more. This is by far the cheapest way to integrate relays into Control4.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
Polyaire manufacture Airtouch4, the new standard in Smart Air Conditioning.
AirTouch can replace your air conditioner's wall controller and lets you control your set point temperature, turn on or off different air conditioning zones, manage airflow and monitor temperatures throughout your house.
With the Chowmain Airtouch4 driver for Control4, you can now integrate the systems and zones managed by the Airtouch4 for seamless operation.
Minimum quantity for "Polyaire Airtouch4" is 1.
KNX Utility Generic Monitor enables Control4 to access KNX data. It is designed to be used in conjunction with the Control4 KNX Routing Gateway.
One instance of this driver is to be used for monitoring a datatype (e.g. gas usage, CO2 concentration, water consumption etc) and supports Current Value and Total Consumption fields.
While you can view instantaneous usage and the total consumption you have used so far in the driver’s properties, this driver is ultimately designed to be used alongside BMS Monitor - a unique driver for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data.
Sensibo makes your existing air conditioner smart and connected! Sensibo is an external device that you pair your remote controlled air conditioner with. Sensibo will work with the majority of infra-red based HVAC systems whether it is a mini split, window AC, ductless, portable, heat pump and even central air conditioners. The Chowmain driver for Sensibo communicates to Sensibo via the Sensibo Cloud API which enables full two way control and feedback over room temperature, humidity, setpoints, hvac mode, fan speeds and swing.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
Virgin Media Limited is a British company which provides telephone, television and internet services in the United Kingdom
The Chowmain Virgin Media Channels driver is designed to replace the existing RF_CABLE cloud driver to automatically get the latest channels from Virgin Media including channel numbers, names, icons, currently playing information and more.
This LIFX LED Wi-Fi Bulb Control4 driver gives you local integration of these lights including:
The Pushover driver can be used to send and receive notifications from the Pushover service. Notifications can be sent using driver commands with a user settable Title, Message, Sound and destination device. Incoming messages can be used to trigger events in RTI and trigger custom automation.
The received events are the real power in this driver, allowing it to be connected with devices like IFTTT and Zapier enabling RTI to be controlled by 1000's of services that are otherwise unavailable.
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
Command seamless Streamers with LinkPlay embebed as Arylic and Hall Audio and dozens of regional solutions With these drivers you can stream music using Control4, call presets, make multiroom music seamless Supports Streams (LinkPlay App – WiiM Home is required to use Deezer, Tidal, Amazon Music, Napster, Tunein, etc) For Spotify., use directly Spotify App sending Spotify Connect. The result will be very Similar with Control4 Native Streaming.
Control4 sessions will join zones using several devices (up to eight) over IP network Room will turn on Control4 on the same way using Control4 Connect with Spotify. These affordable devices are a great option to budgets projects, make a great sound with minor investment
These advanced Control4 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install. Also supports the FIX matrix.
We're offering drivers in the following sizes to help eliminate extra bindings created by more "generic" versions including:
In addition you can save and recall presets and scenes.
