This product cannot be added to thecart because you are not logged in.
The Chowmain Echonet Lite driver opens Control4 integration into any Echonet Lite enabled Home Air Conditioner unit. Popular manufacturer's such as Mitsubishi, Panasonic, Fujitsu, Toshiba, Daikin and more already adopt the Echonet Lite protocol.
Polyaire manufacture Airtouch5, the new standard in Smart Air Conditioning.
AirTouch can replace your air conditioner's wall controller and lets you control your set point temperature, turn on or off different air conditioning zones, manage airflow and monitor temperatures throughout your house.
With the Chowmain Airtouch5 driver for Control4, you can now integrate the systems and zones managed by the Airtouch5 for seamless operation.
Minimum quantity for "Polyaire Airtouch5" is 1.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required.
Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised
This driver is a simple with multiple icons to control a mirror or heated towel rail with a Relay.
Features
Homemation Relay Fan Speed Driver
This is used to control a fan via relays.
There are multiple versions of the driver for various speed combinations. Currently supported are:
Polyaire manufacture Airtouch4, the new standard in Smart Air Conditioning.
With the Chowmain Airtouch4 driver for Control4, you can now integrate the systems and zones managed by the Airtouch4 for seamless operation.
Minimum quantity for "Polyaire Airtouch4" is 1.
Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces, blinds and more!
This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.
Integration into Control4 allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
The Daikin Airbase BRP15B61 lets you control your Daikin ducted or SkyAir system via apps on your phone or tablet. This module is easily can be easily retrofit without installation of new wiring as it is powered by (and communicates via) the Daikin P1 and P2 bus terminals and communicates via wifi.
Thanks to Chowmain the Airbase is now integrated into Control4 for full two way control and feedback over temperature, HVAC mode, setpoint, fan speed and zone control. We have also added additional functionality to the driver to handle presets and scheduling internally.
Setup of hardware and driver should take you no more than 30 minutes once you get the hang of it.
Aprilaire Extended Wi-Fi Thermostat driver by Domosapiens with full IAQ control, complete local/remote sensor support and innovative new FLEX Mode for Presets and Schedule. One driver supports the S86WMUPR, 8810, 8820, 8830 and 8840 Aprilaire Home Automation Wi-Fi thermostats.
Advantage Air is an Australian based HVAC manufacturer based in Perth, Western Australia that sells HVAC systems in Australia and South Africa. MyAir is Advantage Air’s premium reverse cycle air conditioning system with 10 zones and individual room airflow control.
Chowmain’s MyAir driver for Control4 will work with all models of MyAir by providing two way control and feedback.
Homemation Occupancy DriverThis driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.Features
*** SUPPORTS OS 2.8*** The Omni and Lumina control systems from HAI (now Leviton) provide comprehensive security, energy management and sophisticated lighting control. For more details on the Omni systems, please go to the Leviton website for Omni Security Systems.
The Domosapiens driver for these systems communicates over Ethernet IP and provides enhanced features and reliability.
The Chowmain Haiku Driver for Control4 allows integration of the Haiku based Big Ass Fans and Big Ass Lights into Control4 allowing full 2 way multispeed fan and multi level lighting control over your home.
Integration into Control4 allows control from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls and cloud based 4sight remote monitoring and control service. On top of that it exposes control over the Haiku products in the Control4 ecosystem to provide interaction from other devices in the home. From turning off your fans and lights when you arm your security system to automatically turning them on when it detects you are at home and if the temperature is at an uncomfortable level integration provides you with so many different solutions to make your lifestyle that much easier.
Monitor temperatures and get notified easily when the temperature of that area or device goes above/below a custom set point