This product cannot be added to thecart because you are not logged in.
The Advanced Hebcal driver is your one stop shop for all times/holidays from the Jewish calendar.
All data is initially pulled from Hebcal.com, and stored locally. By default, 2 years of data will be downloaded.
With this driver, schedules are automatically created in the scheduler tab for the next Candle Lighting and Havdalah times, as well as system variables for Holidays, Parsha, Sefira etc…
This driver is used to view and make changes to Variables, created in the Control4 Variables agent, from a single UI.
Supported Variable TypesCurrently the following variable types are supported:
Aprilaire Extended Wi-Fi Thermostat driver by Domosapiens with full IAQ control, complete local/remote sensor support and innovative new FLEX Mode for Presets and Schedule. One driver supports the S86WMUPR, 8810, 8820, 8830 and 8840 Aprilaire Home Automation Wi-Fi thermostats.
FREE Control4 drivers for the Axion Lighting DMX Controller. The only DMX controller specifically designed around the Custom Integration market as well as designed and manufactured in the USA!
Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised
Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required.
Minimum quantity for "Bosch Security Solution Series" is 1.
Minimum quantity for "Bticino Living Now and MyHomeSever1" is 1.
Minimum quantity for "Bticino MyHome" is 1.
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
Monitor temperatures and get notified easily when the temperature of that area or device goes above/below a custom set point
The Collingwood TR2818 Wifi-to-RF transmitter is designed to provide easy control of up to 8 zones of RGB, RGBW or CT (colour temperature) lighting.
Using this with the C100924 RGB & RGBW controller removes the need for complicated DMX systems, with multi-zone colour change easily achievable.
This driver suite brings compatibility for these systems into Control4, with built-in support for the zone-learning setup process, scene save & recall functionality, and custom commands allowing for 10 unique run modes.
Colour Wheel for Control4 is a unique driver from Janus technology providing a sleek, colourful, and intuitive web interface for Control4 RGB, RGBW and Tuneable White (WW) Lighting drivers.
The screen is dominated by the spectacular colour wheel, which allows for the easy control of multiple lighting channels, adapting to type of light controller - RGB, RGBW, WW. There is support for 8 scenes per room, with on-screen visual scene colour indication, and simple selection. The interface complements the existing Control4 lighting screen, and is selectable from any T3 touch screen.
Minimum quantity for "Connector Blind RF433Mhz and Dooya Bridge" is 1.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.
Features
Properties
Connections
FAQ
4Drivers has driver to make a seamless integration with tese Biometric readers You can: Import all users Choose actions for each one Open relay if connected to solution Try this easy integration and robust solution on you project
Homemation – Crestron Lighting Driver
This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.
Secondary Drivers:
