Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces, blinds and more!
This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.
Integration into Control4 allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.
This product cannot be added to thecart because you are not logged in.
Chowmain has integrated the range of TP-Link Wifi based Smart Home products into Control4 with two way control and feedback. This provides easy to retrofit solutions for indoor / outdoor smart plug control, power strip control, inwall outlet/switch/dimmer control and also LED bulb/strip control. The hardware is extremely affordable with outlets starting at $24.99, bulbs at $19.99, light switches at $39.99 and power strips at $79.99 MSRP. It definately adds value to any Control4 installation.
Colour Wheel for Control4 is a unique driver from Janus technology providing a sleek, colourful, and intuitive web interface for Control4 RGB, RGBW and Tuneable White (WW) Lighting drivers.
The screen is dominated by the spectacular colour wheel, which allows for the easy control of multiple lighting channels, adapting to type of light controller - RGB, RGBW, WW. There is support for 8 scenes per room, with on-screen visual scene colour indication, and simple selection. The interface complements the existing Control4 lighting screen, and is selectable from any T3 touch screen.
Now supporting RGB and RGBW plus Warm White and Cool White Devices!
Looking for an inexpensive way to add controllable LED light strips to your Control4 project without having an additional "hub" to manage or complicated DMX solution?
Solution: Nexlux Wi-Fi enabled LED strips and this Control4 driver.
*** SUPPORTS OS 2.8*** The Omni and Lumina control systems from HAI (now Leviton) provide comprehensive security, energy management and sophisticated lighting control. For more details on the Omni systems, please go to the Leviton website for Omni Security Systems.
The Domosapiens driver for these systems communicates over Ethernet IP and provides enhanced features and reliability.
Looking for a controllable LED light to add to your Control4 project without having an additional "hub" to manage or a complicated solution like DMX?
Solution: WiZ Wi-Fi enabled LED bulbs and this Control4 driver.
Homemation Occupancy DriverThis driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.Features
Homemation – Crestron Lighting Driver
This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.
Secondary Drivers:
Control4 Visual Navigator is a unique driver from Janus Technology that allows you to view and control the state of devices across your entire home from any T3 touch screen!
Utilising Control4's webview technology, Visual Navigator can display the state of all sensors, relays, lights and cameras in your project on a floorplan of your site - while allowing control of all drivers from a familiar interface.
Visual Navigator uses the concept of layers. Each layer corresponds to a distinct set of driver types within your Control4 project (e.g. Sensors, Lighting, Security...).
LIFX (pronounced Life-X) is a line of energy-efficient, multi-color, Wi-Fi enabled LED lighting products that can be controlled via a Wi-Fi equipped device such as a smartphone or smartwatch.
The LIFX driver for Control4 allows for two way control and feedback of all LIFX products including bulbs, strips, beams, tiles and more.
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
Minimum quantity for "Bticino MyHome" is 1.
The KNX Coloured Lighting driver supports all datapoint types that could be used for coloured light fixtures (RGB/RGBW and Tunable White), displaying common and familiar control interface for the end user and providing compatibility with our Colour Wheel and Circadian Rythmn drivers