Lists all the different platforms the marketplace supports
Control4 Visual Navigator is a unique driver from Janus Technology that allows you to view and control the state of devices across your entire home from any T3 touch screen!
Utilising Control4's webview technology, Visual Navigator can display the state of all sensors, relays, lights and cameras in your project on a floorplan of your site - while allowing control of all drivers from a familiar interface.
Visual Navigator uses the concept of layers. Each layer corresponds to a distinct set of driver types within your Control4 project (e.g. Sensors, Lighting, Security...).
This product cannot be added to thecart because you are not logged in.
Minimum quantity for "Bticino MyHome" is 1.
Minimum quantity for "RS232/485 to IP" is 1.
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
Features
KNX Utility Generic Monitor enables Control4 to access KNX data. It is designed to be used in conjunction with the Control4 KNX Routing Gateway.
One instance of this driver is to be used for monitoring a datatype (e.g. gas usage, CO2 concentration, water consumption etc) and supports Current Value and Total Consumption fields.
While you can view instantaneous usage and the total consumption you have used so far in the driver’s properties, this driver is ultimately designed to be used alongside BMS Monitor - a unique driver for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data.
This driver brings full support for the wLightBox RGB controller into Control4, with two-way control and feedback, advanced lighting scene availability, and full support for the integrated LiteWave effects via custom commands.
As integrators there are times where we cannot replace ISP provided hardware (eg Cable modem or NBN modem). As such we are reliant on the uptime of these devices and when they go down they take down many of the devices in the home. The Chowmain internet rebooter driver allows reboot of modems, routers, switches, access points and other networking equipment directly from Control4's built in relays.
The idea is that the driver will monitor a specific website periodically and if it fails to retrieve the content from that website multiple times it will execute the reboot sequence. Note that this driver requires wiring of Control4's relays upto the power supplies of the networking equipment.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required.
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised
This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.
Supporting almost all video and audio formats, codecs and file containers, including all modern video standards such as HDMI 2.0, Ultra HD 4K, HDR, 3D subtitles and HEVC video codec with one billion colors (10-Bit color encoding), the Zappiti 4K HDR media player range sets an entirely new standard. The top class Zappiti Duo 4K HDR is equipped with an internal 3.5" SATA HDD bay with hot swap function for huge total capacity (up to 32 TB) and offers powerful Wi-Fi 5G and Ethernet gigabit network capability. The Zappiti 4K HDR media players are compatible with most audio and video formats such as UHD ISO, BD ISO, M2TS, MKV 4K, MVC 3D with 3D subtitles, BD and UHD menus support, home theater audio (including Dolby Atmos and DTS:X) and high-resolution lossless audio files. This new player range is also compatible with Zappiti Video for the best possible home theater experience.
A premium product deserves an excellent interface to match as such the Chowmain Zappiti driver for Control4 offers full library access on all Control4 user interfaces including the Control T3 touchscreen and Neeo remote control.
Put the finishing touch on your customer's Zappiti system using our driver for Control4.