Lighting

The SainSmart iMatic V2 provides 8 x 250V/AC 10A Relays channels that is controlled over ethernet TCP/IP.  This unit is extremely affordable, is powered via a local 12vdc supply and is also din mountable.  Other solutions cost anywhere from 3 times to 10 times more.  This is by far the cheapest way to integrate relays into Control4.

Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.

Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub

Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus

Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.  

This LIFX LED Wi-Fi Bulb Control4 driver gives you local integration of these lights including:

• No Internet required - sends commands directly to the lights on the local LAN!
• Dynamic selection - automatically finds all the bulbs on the network and lets you select from a drop down with the name!
• Individual sliders for dimming, selecting color, adjusting temperature and saturation

Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.

Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.

Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.

This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.

 Features

• Quickly select the lighting driver from System Design
• Quickly bind the Relay output to the Relay Driver you need to control
• If the light it turned on via the light icon on a navigator this will reflect on the relay driver
• If the relay device is triggered the commands are routed to the lighting device

LIfeSmart Integration with Control4 Uses Lighting Modules, cube sensors on an affordable solution now with Control4
With this set of drivers some Yale Lock can integrate using regular ZigBee cards
On our development scenario we connected a YDF-40 lock easily. You can open/close and users will fire event when access the lock Instruction videos coming soon

Futhermore, LifeSmart Scenes will fire events on Control4. 

This driver brings full support for the wLightBox RGB controller into Control4, with two-way control and feedback, advanced lighting scene availability, and full support for the integrated LiteWave effects via custom commands.

This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.

Features

• Quickly select the lighting driver from System Design
• Quickly bind the Relay outputs to the Relay Driver you need to control
• If the light is dimmed on via the light icon on a navigator this will reflect on the relay driver
• If the relay device is triggered the commands are routed to the lighting device

A Control4 Ethernet driver for the Nicolaudie STICK DE3 DMX lighting controllers.
The driver includes controls for adjusting brightness and RGB colour levels, as well as recalling scenes saved on the STICK controller.

The STICK DE3 is a state-of-the-art DMX sequencer, capable of complex dynamic scenes, and stunning colour chases; integration with the Control4 takes it to the next level.  This driver is also fully compatible with Colour Wheel, allowing for a sleek and intuitive end user experience.

FREE Control4 drivers for the Axion Lighting DMX Controller. The only DMX controller specifically designed around the Custom Integration market as well as designed and manufactured in the USA!

The Collingwood TR2818 Wifi-to-RF transmitter is designed to provide easy control of up to 8 zones of RGB, RGBW or CT (colour temperature) lighting.

Using this with the C100924 RGB & RGBW controller removes the need for complicated DMX systems, with multi-zone colour change easily achievable.

This driver suite brings compatibility for these systems into Control4, with built-in support for the zone-learning setup process, scene save & recall functionality, and custom commands allowing for 10 unique run modes.

This Control4 driver integrates the Philips Hue HDMI Sync Box into your smart home.

Sync your Philips Hue smart lights to the content on your TV screen - now fully controllable through Control4.

This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.

Features

• Quickly bind the contact connection
• Quickly bind the corresponding keypad connection to a device (like the Toggle of a light)
• Should mimic a keypad button press including the push and hold to dim a light.
• Contact Connection 1 is linked to Keypad Connection 1, and so on…

Properties

• Device Settings
  • Click Rate: This is where you set the click rate to differentiate from a quick click (single tap) or a longer push and hold

Connections

• • 20 Contacts Inputs: This is where you will bind the driver to devices like the contact on a controller, IO Extender, Z2IO or Z2C (or similar)
  • 20 Keypad Inputs: This is where you will bind the driver to a device like you would a keypad button

FAQ

• Can you give us some examples of how we could use this driver?
  • We have had some requests were an old, centralised lighting system is being changed and need to use existing switchgear. This allows for pulse, press, release inputs to a contact so that the existing switchgear acts as if it were a keypad button
• Can you have more than one Driver per project?
  • Sure can.
• Can you bind multiple connections to a contact connection?
  • Nope.
• Can you bind multiple connections to a keypad connection?
  • Nope.
• What if I have 2 buttons that need to control one light
  • You can bind the one contact to a connection and then connect to other to another contact connection. The corresponding keypad connections can both be bound to the toggle connection of the light.
• I want to try before I buy…
  • No problem, the driver comes with a free 15-day trial