Platforms

Polyaire manufacture Airtouch4, the new standard in Smart Air Conditioning.

AirTouch can replace your air conditioner's wall controller and lets you control your set point temperature, turn on or off different air conditioning zones, manage airflow and monitor temperatures throughout your house.

With the Chowmain Airtouch4 driver for Control4, you can now integrate the systems and zones managed by the Airtouch4 for seamless operation.

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into URC allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using URC's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.

Homemation Relay Fan Speed Driver

This is used to control a fan via relays.

There are multiple versions of the driver for various speed combinations. Currently supported are:

• 1-Speed (On & Off)
• 2-Speed (High, Low, Off)
• 3-Speed (High, Medium, Low, Off)
• 4-Speed (High, Medium High, Medium Low, Low, Off)

Homemation – Crestron Lighting Driver

This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.

Secondary Drivers: 

• To add dimmable lighting loads to the system, use the "HM Dimmable Light" driver.

• To add switched lighting loads to the system, use the "HM Non Dimmable Light" driver.

• To use a relay with non-lighting loads, use the “HM Relay Interface” Driver which allows you to connect a Control4 Relay Driver so that it reflects in the correct place on a Navigator.

• To use a keypad button from Crestron within Control4 you can use the “HM Keypad” Driver. Each button requires an address from Crestron. You can then bind these in connections or use them in programming.

This IP driver supports the Uprise Smart Shade line of products. It integrates as a native shade and even allows preset recall.

Hikvision, who is a popular surveillance manufacturer, produce a range of products for both residential and commercial applications.  As one of our top requested drivers we felt that we needed to create the ultimate Hikvision driver for Control4.

This driver pushes the integration of Hikvision by offering integration to NVR/DVRs and IP Cameras which allows integrators to push the boundaries of security and home automation.  This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.

Project validation, error testing, dealer contact and controller monitoring tools for Control4.

This driver is a simple with multiple icons to control a mirror or heated towel rail with a Relay.

Features

• Multiple Icons
• Quickly bind the Relay output to the Relay Driver you need to control
• Based on an experience button so the icon can be placed anywhere on a navigator
• Has keypad connections to control the heated towel rail
• Has a timeout so that the heated towel rail does not stay on for longer than it should

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into RTI allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using RTI's touchscreens, mobile applications, keypads, handheld remote controls, etc.

JVC LX-UH1 & LX-NZ3 Projector Driver

This driver allows 2-Way RS232 communication with the JVC LX-UH1 & LX-NZ3 projector.

Looking for a controllable LED light to add to your Control4 project without having an additional "hub" to manage or a complicated solution like DMX?

Solution: WiZ Wi-Fi enabled LED bulbs and this Control4 driver.

Looking for a controllable LED light to add to your RTI project without having an additional "hub" to manage or a complicated solution like DMX?

Solution: WiZ Wi-Fi enabled LED bulbs and this RTI driver.

Looking for a controllable LED light to add to your ELAN project without having an additional "hub" to manage or a complicated solution like DMX?

Solution: WiZ Wi-Fi enabled LED bulbs and this ELAN driver.

This LIFX LED Wi-Fi Bulb Control4 driver gives you local integration of these lights including:

• No Internet required - sends commands directly to the lights on the local LAN!
• Dynamic selection - automatically finds all the bulbs on the network and lets you select from a drop down with the name!
• Individual sliders for dimming, selecting color, adjusting temperature and saturation

Supporting almost all video and audio formats, codecs and file containers, including all modern video standards such as HDMI 2.0, Ultra HD 4K, HDR, 3D subtitles and HEVC video codec with one billion colors (10-Bit color encoding), the Zappiti 4K HDR media player range sets an entirely new standard. The top class Zappiti Duo 4K HDR is equipped with an internal 3.5" SATA HDD bay with hot swap function for huge total capacity (up to 32 TB) and offers powerful Wi-Fi 5G and Ethernet gigabit network capability. The Zappiti 4K HDR media players are compatible with most audio and video formats such as UHD ISO, BD ISO, M2TS, MKV 4K, MVC 3D with 3D subtitles, BD and UHD menus support, home theater audio (including Dolby Atmos and DTS:X) and high-resolution lossless audio files. This new player range is also compatible with Zappiti Video for the best possible home theater experience.

A premium product deserves an excellent interface to match as such the Chowmain Zappiti driver for Control4 offers full library access on all Control4 user interfaces including the Control T3 touchscreen and Neeo remote control.

Put the finishing touch on your customer's Zappiti system using our driver for Control4.

This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.

 Features

• Quickly select the lighting driver from System Design
• Quickly bind the Relay output to the Relay Driver you need to control
• If the light it turned on via the light icon on a navigator this will reflect on the relay driver
• If the relay device is triggered the commands are routed to the lighting device

Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.

The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised