This product cannot be added to thecart because you are not logged in.
The YATUN driver suite exposes various Number Variable input connections in its drivers.
This generic monitor can be used to connect to these connections, enabling compatibility of all Number Variable connections in the YATUN driver suite with BMS Monitor.
This driver is used to receives readings locally, via IP (Wi-Fi or Wired), for the Victron GX MQTT service. It is ALSO a “Webview” driver allowing you to use T3 or T4 Touchscreens to view the GX web interface.
Tested on the Cerbo GX, Color Control GX & Venus GX.
This driver enables you randomly trigger one of several programming events.
Up to 30 different events may be specified and whenever requested via programming, the driver will randomly trigger one of the specified events. You may also request the driver to trigger an 'ending event' for the previously-triggered random event either before or after triggering a new random event. This would be especially useful if random events are used to trigger lighting when away from home, for example. A shuffle mode is also available.
Control4 Visual Navigator is a unique driver from Janus Technology that allows you to view and control the state of devices across your entire home from any T3 touch screen!
Utilising Control4's webview technology, Visual Navigator can display the state of all sensors, relays, lights and cameras in your project on a floorplan of your site - while allowing control of all drivers from a familiar interface.
Visual Navigator uses the concept of layers. Each layer corresponds to a distinct set of driver types within your Control4 project (e.g. Sensors, Lighting, Security...).
Minimum quantity for "RS232/485 to IP" is 1.
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
Features
KNX Utility Generic Monitor enables Control4 to access KNX data. It is designed to be used in conjunction with the Control4 KNX Routing Gateway.
One instance of this driver is to be used for monitoring a datatype (e.g. gas usage, CO2 concentration, water consumption etc) and supports Current Value and Total Consumption fields.
While you can view instantaneous usage and the total consumption you have used so far in the driver’s properties, this driver is ultimately designed to be used alongside BMS Monitor - a unique driver for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data.
As integrators there are times where we cannot replace ISP provided hardware (eg Cable modem or NBN modem). As such we are reliant on the uptime of these devices and when they go down they take down many of the devices in the home. The Chowmain internet rebooter driver allows reboot of modems, routers, switches, access points and other networking equipment directly from Control4's built in relays.
The idea is that the driver will monitor a specific website periodically and if it fails to retrieve the content from that website multiple times it will execute the reboot sequence. Note that this driver requires wiring of Control4's relays upto the power supplies of the networking equipment.
Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required.
Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.
The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised
This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.
Project validation, error testing, dealer contact and controller monitoring tools for Control4.
Enables you to manage the state of Control4 Contact Sensors via programming. This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.
