Platforms

JVC LX-UH1 & LX-NZ3 Projector Driver

This driver allows 2-Way RS232 communication with the JVC LX-UH1 & LX-NZ3 projector.

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into RTI allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using RTI's touchscreens, mobile applications, keypads, handheld remote controls, etc.

This driver is a simple with multiple icons to control a mirror or heated towel rail with a Relay.

Features

• Multiple Icons
• Quickly bind the Relay output to the Relay Driver you need to control
• Based on an experience button so the icon can be placed anywhere on a navigator
• Has keypad connections to control the heated towel rail
• Has a timeout so that the heated towel rail does not stay on for longer than it should

Project validation, error testing, dealer contact and controller monitoring tools for Control4.

Hikvision, who is a popular surveillance manufacturer, produce a range of products for both residential and commercial applications.  As one of our top requested drivers we felt that we needed to create the ultimate Hikvision driver for Control4.

This driver pushes the integration of Hikvision by offering integration to NVR/DVRs and IP Cameras which allows integrators to push the boundaries of security and home automation.  This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.

This IP driver supports the Uprise Smart Shade line of products. It integrates as a native shade and even allows preset recall.

Homemation – Crestron Lighting Driver

This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.

Secondary Drivers: 

• To add dimmable lighting loads to the system, use the "HM Dimmable Light" driver.

• To add switched lighting loads to the system, use the "HM Non Dimmable Light" driver.

• To use a relay with non-lighting loads, use the “HM Relay Interface” Driver which allows you to connect a Control4 Relay Driver so that it reflects in the correct place on a Navigator.

• To use a keypad button from Crestron within Control4 you can use the “HM Keypad” Driver. Each button requires an address from Crestron. You can then bind these in connections or use them in programming.

Homemation Relay Fan Speed Driver

This is used to control a fan via relays.

There are multiple versions of the driver for various speed combinations. Currently supported are:

• 1-Speed (On & Off)
• 2-Speed (High, Low, Off)
• 3-Speed (High, Medium, Low, Off)
• 4-Speed (High, Medium High, Medium Low, Low, Off)

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into URC allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using URC's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.

Polyaire manufacture Airtouch4, the new standard in Smart Air Conditioning.

AirTouch can replace your air conditioner's wall controller and lets you control your set point temperature, turn on or off different air conditioning zones, manage airflow and monitor temperatures throughout your house.

With the Chowmain Airtouch4 driver for Control4, you can now integrate the systems and zones managed by the Airtouch4 for seamless operation.

These advanced ELAN 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install. 

Currently we are providing an 80x80 matrix driver for ELAN. If you only have an 8x8, for example, simply connect the first 8 inputs and outputs. 

In addition we have also implemented saving and recalling presets through custom commands.

These advanced Control4 2-way IP and RS232 drivers can be used with 2,000+ HDTV Supply WolfPack Modular Matrices available in any of their 8-chassis sizes. With support for up to 160 input x 160 output there is a solution for any install. Also supports the FIX matrix.

We're offering drivers in the following sizes to help eliminate extra bindings created by more "generic" versions including:

• 4x4
• 8x8
• 9x9
• 16x16
• 18x18
• 36x36
• 80x80
• 160x160

In addition you can save and recall presets and scenes.

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces or blinds to your smart devices.

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into ELAN allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using ELAN's touchscreens, mobile applications, keypads, handheld remote controls and more.

Kaleidescape presents the world's most authentic cinematic experience with the content you love.  Whether on disc or as a digital download from the Kaleidescape Movie Store, Kaleidescape brings together all your movies in a visually stunning library making it beautifully simple to access and enjoy movies that truly matter to you.

A premium product deserves an excellent interface to match as such the Chowmain Kaleidescape driver for URC offers full library access on all URC touchscreens for any IP controlled Kaleidescape system along with an extensive list of automation features that make the integrated experience more rewarding.

This driver will only work on an MRX-15 and above.

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces, blinds and more!

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into Control4 allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.

Enables you to manage the state of Control4 Contact Sensors via programming.  This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.