This product cannot be added to thecart because you are not logged in.
A Control4 Ethernet driver for the Nicolaudie STICK DE3 DMX lighting controllers. The driver includes controls for adjusting brightness and RGB colour levels, as well as recalling scenes saved on the STICK controller.
The STICK DE3 is a state-of-the-art DMX sequencer, capable of complex dynamic scenes, and stunning colour chases; integration with the Control4 takes it to the next level. This driver is also fully compatible with Colour Wheel, allowing for a sleek and intuitive end user experience.
The Collingwood TR2818 Wifi-to-RF transmitter is designed to provide easy control of up to 8 zones of RGB, RGBW or CT (colour temperature) lighting.
Using this with the C100924 RGB & RGBW controller removes the need for complicated DMX systems, with multi-zone colour change easily achievable.
This driver suite brings compatibility for these systems into Control4, with built-in support for the zone-learning setup process, scene save & recall functionality, and custom commands allowing for 10 unique run modes.
The KNX Coloured Lighting driver supports all datapoint types that could be used for coloured light fixtures (RGB/RGBW and Tunable White), displaying common and familiar control interface for the end user and providing compatibility with our Colour Wheel and Circadian Rythmn drivers
Control4 Visual Navigator is a unique driver from Janus Technology that allows you to view and control the state of devices across your entire home from any T3 touch screen!
Utilising Control4's webview technology, Visual Navigator can display the state of all sensors, relays, lights and cameras in your project on a floorplan of your site - while allowing control of all drivers from a familiar interface.
Visual Navigator uses the concept of layers. Each layer corresponds to a distinct set of driver types within your Control4 project (e.g. Sensors, Lighting, Security...).
Minimum quantity for "Bticino MyHome" is 1.
Enhanced Lighting Interface is an invaluable companion driver to the unique lighting drivers by Janus; Color Wheel and Circadian Lighting.
The driver allows control of separate single-channel dimmer drivers as if they were distinct channels of a multi-channel fixture, fully managing the relative scaling of each channel needed to show complex colours.
It can behave as an RGB, RGBW, WW or Tunable white fixture, bringing along with it the relevant custom commands – so you can take full control of the integration with Control4 programming!
This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.
Features
This driver brings full support for the wLightBox RGB controller into Control4, with two-way control and feedback, advanced lighting scene availability, and full support for the integrated LiteWave effects via custom commands.
Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today.
Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub
Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus
Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver.
Circadian Lighting is a new driver suite by Janus Technology that allows you to easily program a circadian rhythm for any tuneable white dimmers in your project.
NOW FULLY SUPPORTS OS 3.3 Lighting
Each circadian lighting controller can configure a schedule entirely from composer for a subset of lights you choose from your project - this means you can have multiple entirely different schedules running in one project, with a different subset of lights being controller by each!
Common use cases of this would be to synchronise the colour temperature of your lamps to your location's daylight, or possibly even your sleep schedule to give warmer colours at bedtime and cooler ones during the day.
