Utility

This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.

Features

• Quickly select the lighting driver from System Design
• Quickly bind the Relay outputs to the Relay Driver you need to control
• If the light is dimmed on via the light icon on a navigator this will reflect on the relay driver
• If the relay device is triggered the commands are routed to the lighting device

KNX Utility Generic Monitor enables Control4 to access KNX data. It is designed to be used in conjunction with the Control4 KNX Routing Gateway.

One instance of this driver is to be used for monitoring a datatype (e.g. gas usage, CO2 concentration, water consumption etc) and supports Current Value and Total Consumption fields.

While you can view instantaneous usage and the total consumption you have used so far in the driver’s properties, this driver is ultimately designed to be used alongside BMS Monitor - a unique driver for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data.

As integrators there are times where we cannot replace ISP provided hardware (eg Cable modem or NBN modem). As such we are reliant on the uptime of these devices and when they go down they take down many of the devices in the home. The Chowmain internet rebooter driver allows reboot of modems, routers, switches, access points and other networking equipment directly from Control4's built in relays.

The idea is that the driver will monitor a specific website periodically and if it fails to retrieve the content from that website multiple times it will execute the reboot sequence. Note that this driver requires wiring of Control4's relays upto the power supplies of the networking equipment.

Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.

The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. 

Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.

The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised

This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.

 Features

• Quickly select the lighting driver from System Design
• Quickly bind the Relay output to the Relay Driver you need to control
• If the light it turned on via the light icon on a navigator this will reflect on the relay driver
• If the relay device is triggered the commands are routed to the lighting device