Homemation
Contact information
Developer Headquarters
Johannesburg ,
South Africa

Homemation is a Southern African distributor of many brands, Control4 being one of them. We have developed a few drivers that are mosly used in-house that we would like to start sharing.

No posts found

MSRP: $45.00
Control4, Current Driver Version: 1

This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.

Features

  • Quickly bind the contact connection
  • Quickly bind the corresponding keypad connection to a device (like the Toggle of a light)
  • Should mimic a keypad button press including the push and hold to dim a light.
  • Contact Connection 1 is linked to Keypad Connection 1, and so on…

Properties

  • Device Settings
    • Click Rate: This is where you set the click rate to differentiate from a quick click (single tap) or a longer push and hold

Connections

    • 20 Contacts Inputs: This is where you will bind the driver to devices like the contact on a controller, IO Extender, Z2IO or Z2C (or similar)
    • 20 Keypad Inputs: This is where you will bind the driver to a device like you would a keypad button

FAQ

  • Can you give us some examples of how we could use this driver?
    • We have had some requests were an old, centralised lighting system is being changed and need to use existing switchgear. This allows for pulse, press, release inputs to a contact so that the existing switchgear acts as if it were a keypad button
  • Can you have more than one Driver per project?
    • Sure can.
  • Can you bind multiple connections to a contact connection?
    • Nope.
  • Can you bind multiple connections to a keypad connection?
    • Nope.
  • What if I have 2 buttons that need to control one light
    • You can bind the one contact to a connection and then connect to other to another contact connection. The corresponding keypad connections can both be bound to the toggle connection of the light.
  • I want to try before I buy…
    • No problem, the driver comes with a free 15-day trial
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $45.00
Control4, Current Driver Version: 5

This driver is a simple convertor that allows you to use a Dimmer Proxy (Dimmer Driver) within Composer and get 10 Relay Connections out.

Features

  • Quickly select the lighting driver from System Design
  • Quickly bind the Relay outputs to the Relay Driver you need to control
  • If the light is dimmed on via the light icon on a navigator this will reflect on the relay driver
  • If the relay device is triggered the commands are routed to the lighting device

 

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $100.00
Control4, Current Driver Version: 20201212

Homemation Occupancy Driver

This driver allows for quick & easy setup of Occupancy for a room to turn lights, AV & HVAC off when there has been no movement for a defined period.

Features

  • Ramp dimmers to a pre-set level on Occupancy
  • Set an Occupancy Timeout of 1 minute to 1 hour
  • Turn a rooms AV off when Occupancy Timeout is reached
  • Control Thermostats based on Occupancy
    • This was tested & works well with the Chowmain Intesis Driver but should work with all Thermostat Drivers
  • Enable or disable the Occupancy via UI Button on a Navigator
  • Enable, Disable or Toggle the driver with a Keypad with LED feedback
  • A separate but FREE Occupancy Controller driver to update multiple Occupancy Drivers simultaneously from programming
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $45.00
Control4, Current Driver Version: 21

This driver is a simple convertor that allows you to use a Lighting Device within Composer and get a Relay Connection output.

 Features

  • Quickly select the lighting driver from System Design
  • Quickly bind the Relay output to the Relay Driver you need to control
  • If the light it turned on via the light icon on a navigator this will reflect on the relay driver
  • If the relay device is triggered the commands are routed to the lighting device

 

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $100.00
Control4, Current Driver Version: 20190515

WebRelay is an electrical relay (or electrical switch) with a built-in web server. The relay can be turned on, off, or pulsed from this driver. The WebRelay has a long history of reliable operation in many applications including remote reboot, industrial control, security, and remote control and monitoring.

This works great with the Control4 MDU solution to open and sense a main gate or door of a complex.

This driver is specifically for Single Relay & Contact Unit. Model numbers starting with X-WR-1R12 (https://www.controlbyweb.com/webrelay/)

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $155.00
Control4, Current Driver Version: 2

This driver is used to receives readings locally, via IP (Wi-Fi or Wired), for the Victron GX MQTT service. It is ALSO a “Webview” driver allowing you to use T3 or T4 Touchscreens to view the GX web interface.

Tested on the Cerbo GX, Color Control GX & Venus GX.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.