Elite Fire

Proflame 2 Emulator

Control Your Gas Fireplace with Elegance and Intelligence

Until now, homeowners with premium gas fireplaces have watched as nearly every other system in their home came under smart control, while their fireplace remained stubbornly manual. 

The new Elite Fire Proflame 2 Emulator driver transforms gas fireplaces into smart home centerpieces, seamlessly integrating brands like Kingsman, Marquis, Regency, Town & Country, Kozy Heat, Majestic, Montigo, IHP, and numerous other premium fireplace brands equipped with the SIT Proflame 2 system into Control4. Homeowners can now enjoy effortless fireplace control and safety—all from touchscreens, remotes, or the Control4 mobile app.

Supports:

• ✅ OS 3.x and 4.x compatible*
• ✅ SIT Proflame 2 IFC systems
• ✅ Multiple fireplace brands: Kingsman, Marquis, Regency, Town & Country, Kozy Heat, Majestic, Montigo, IHP, and more. Look for the black Proflame 2 remote. 

Requires:

• Customer must have a Proflame 2 equipped fireplace. The best indicator is a black fireplace remote as shown in product photos. Currently supports 315 Mhz (North America).
• Bond Bridge or Bond Bridge Pro. Does not require a separate Bond driver. Bond driver can be used concurrently for other devices and with other Control4 drivers. This driver only uses Bond to transmit signals - it does not configure any devices on Bond.
• Smart Modes require a temperature sensor that is integrated into the Control 4 project. This may be an HVAC thermostat or a standalone temperature sensor such as a Z2io, SwitchBot temperature/humidity sensor, or any other integrated temperature sensor that provides a temperature output connection binding. The sensor should be located in the same room as the fireplace.

NOTE: 433 Mhz (Europe) support is experimental. We're looking for beta testers in Europe or other locations that
have a 433 Mhz fireplace and remote. 433 Mhz remotes will have a part number printed on the bottom of the remote like 0584050 or 0584052. Please contact drew at blessinghome.tech to participate.

0584040, 0584042 are 315 Mhz part codes are not eligible for the 433 Mhz beta testing program.

Key Features

Intuitive Control

Control every aspect of your fireplace from the Control4 interface with real-time feedback.

• Simple Operation: Familiar thermostat style controls to turn your fireplace on or off instantly
• 6-Level Flame, Fan and Light Modulation: Precisely adjust flame height, fan speed, and light level with 6 independent levels for each.
• Visual Feedback: See room temperature, setpoint, and operating mode at a glance
• Optional Fireplace Timer Integration: For simple on/off control, connect to the Fireplace Timer driver for one-tap on/off control. 
• Auto-off timer: Ensures the fireplace turns off after preset time, increasing safety and efficiency.

Smart Climate Management

Let your fireplace intelligently maintain comfort while optimizing efficiency.

• Auto On/Off Flame Mode: Set target temperature and let the fireplace turn the flame on and off to maintain temperature. In this mode, flame level is set manually.
• Auto Smart Flame Mode: Intelligently reaches and holds your desired temperature. Flame level is set automatically based on the difference between temperature setpoint and room temperature.

Smart Automation

Integrate fireplace control into your whole-home automation for maximum convenience and efficiency.

Example scenarios:

• Turn on the fireplace when room temperature drops below your set point
• Create a "Movie Night" scene with low flame and accent lighting
• Automatically turn off when activating "Away" or "Goodnight" scenes
• Coordinate with HVAC system to optimize home heating efficiency

Advanced Programming Support

Comprehensive programming capabilities enable sophisticated automation and monitoring.

• Commands: Turn on/off and adjust temperature setpoint
• Events: Temperature changed, temperature setpoint changed, mode changed, and state changed. 
• Conditionals: Temperature and setpoint comparisons, mode checks and state checks
• Variables: Many variables covering almost every aspect of the fireplace state

Setup

• Works with any Proflame 2 equipped fireplace - check for the black Proflame 2 remote. The silver Proflame 1 remote indicates the fireplace is not compatible.
• Requires physical access to the fireplace to pair with Control4. 
• Requires physical access to the Bond Bridge to power cycle to allow token retrieval.
• View documentation for detailed setup instructions.

* Driver initially tested on 3.4.3 and 4.1. May work on earlier versions of 3.x