Tedee Smart Lock for Control4 (Local Bridge API)

Control Tedee PRO and Tedee GO smart locks from Control4 over the local
network, with no cloud round-trip for commands. The package has two
drivers: **Tedee Bridge**, which connects to the Tedee Bridge's Local API
and receives instant status updates, and **Tedee Lock** (one per door),
which provides lock/unlock/toggle, live locked/unlocked/jammed status,
battery level and low-battery alerts, door-sensor status, pull-spring
(unlatch) control, and keypad code management from the Control4 app
(Manage Lock → Users, with day, date and time restrictions). **Add All
Locks** creates every lock in one step. Locks appear on touchscreens and
in the app via a standard Control4 Door Lock device.

**Before you install:** the Tedee Bridge needs a fixed (reserved) IP
address, and the Bridge API must be enabled in the Tedee mobile app
(Bridge → Settings → API), with its API token copied. A Tedee Bridge is
required, because the locks are Bluetooth and Control4 can't reach them
directly. The bridge also needs periodic internet access to renew lock
certificates. See the attached *Before You Install* guide.