Description
The 4Drivers Tedee Bridge connects Tedee smart locks to Control4 through the local API of the Tedee Bridge. Commands and status stay on the home network, so locks respond fast and keep working even without internet.
A dedicated Tedee Locks screen in the Navigator shows every lock with its state, battery and door status, plus Lock, Unlock and Pull buttons and Lock All / Unlock All for the whole house. Each lock gets its own 4Drivers Tedee Lock driver, which works with the Control4 Door Lock (relay) driver for native lock icons in each room.
Key Features
- 100% local control through the Tedee Bridge — no cloud dependency
- Navigator screen with all locks: color-coded state, battery, door status and controls
- Lock All / Unlock All, with options to disable Unlock All and skip open doors
- Jam detection, showing where the lock stopped
- Battery level with Low Battery event
- Door sensor outputs per lock and a global "Any Door Open" output
- Native Control4 lock icons through the Door Lock (relay) driver
- Full programming: lock, unlock, jam, door, battery and online/offline events
- Built-in authentication test for fast commissioning
- Up to 10 locks per Bridge; English, Portuguese and Spanish interface
In the Box
- 4Drivers Tedee Bridge — one per Tedee Bridge
- 4Drivers Tedee Lock — one per lock
Requirements
- Tedee Bridge with the Bridge API enabled and Tedee locks paired to it
- Control4 OS 3.3 or higher on the same local network
- Fixed IP address for the Bridge
