Utility

The Advanced Custom Buttons app for Control4 Infinity Edge 5 inch, 7 inch touch panels and MyHome PC features upto 12 custom buttons with dynamic labeling of buttons through the Control4 programming tab and LED feedback for button state.

MSRP: $90 USD

The Advanced Hebcal driver is your one stop shop for all times/holidays from the Jewish calendar.

All data is initially pulled from Hebcal.com, and stored locally. By default, 2 years of data will be downloaded.

With this driver, schedules are automatically created in the scheduler tab for the next Candle Lighting and Havdalah times, as well as system variables for Holidays, Parsha, Sefira etc…

APC’s Switched PDU’s allow you to control the power of devices in your customer’s rack. This is extremely useful for energy saving and remote troubleshooting. Integration into Control4 enables Control4 to do emergency shutdowns on low or high voltage levels or if the total power consumption is exceeding or lower than expected. This ensures that the health of your customer’s rack based equipment is maintained.

MSRP: $90 USD

Control4 BMS Monitor is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views.

The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. Additionally, a range of generic monitoring drivers allow and data to be stored and a hostory visualised

Control4 BMS Monitor Lite is a unique driver from Janus technology for monitoring thermostat and consumption data, providing a simple web interface for viewing this historic data. All data is stored directly on the main controller, and backed up in persistent memory, so it is preserved across power cycles and even system restores. Up to 30 days' data (or 10K samples) are stored for each of the monitored elements, with simple navigation between daily and weekly views. This is a cost-reduced version of our BMS Monitor supporting a single thermostat.

The solution supports any thermostat proxy, v1 or v2 - no special thermostat drivers are required. 

This driver is built specifically for those Muslim Control4 home owners who want to program their home for adhan (or azan) - the call to prayer which happens 5 times a day.

This driver will utilise latitude and longitude co-ordinates along with the timezone to return the prayer times to Control4 from the aladhan website.

We also expose a few other events that are significant.

Enables you to manage the state of Control4 Contact Sensors via programming.  This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.

This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.

Features

• Quickly bind the contact connection
• Quickly bind the corresponding keypad connection to a device (like the Toggle of a light)
• Should mimic a keypad button press including the push and hold to dim a light.
• Contact Connection 1 is linked to Keypad Connection 1, and so on…

Properties

• Device Settings
  • Click Rate: This is where you set the click rate to differentiate from a quick click (single tap) or a longer push and hold

Connections

• • 20 Contacts Inputs: This is where you will bind the driver to devices like the contact on a controller, IO Extender, Z2IO or Z2C (or similar)
  • 20 Keypad Inputs: This is where you will bind the driver to a device like you would a keypad button

FAQ

• Can you give us some examples of how we could use this driver?
  • We have had some requests were an old, centralised lighting system is being changed and need to use existing switchgear. This allows for pulse, press, release inputs to a contact so that the existing switchgear acts as if it were a keypad button
• Can you have more than one Driver per project?
  • Sure can.
• Can you bind multiple connections to a contact connection?
  • Nope.
• Can you bind multiple connections to a keypad connection?
  • Nope.
• What if I have 2 buttons that need to control one light
  • You can bind the one contact to a connection and then connect to other to another contact connection. The corresponding keypad connections can both be bound to the toggle connection of the light.
• I want to try before I buy…
  • No problem, the driver comes with a free 15-day trial

The Contact Us webview driver for Control4 provides dealers with a professional looking contact us page on the T3 touchscreen with customisable company logo, company contact details, google map and clickable URL to the company website.

This adds the final touch to a professionally installed system and provides dealers with a cheap way of marketing their company to people who utilise the touchscreen.

ControlByWeb manufactuer IP enabled inputs, sensors & outputs. Integration into Control4 enables Control4 to monitor and control these inputs and outputs

MSRP: $100 USD

Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.

Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.

Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.

Project validation, error testing, dealer contact and controller monitoring tools for Control4.