Developer Platforms

The Advanced Custom Buttons app for Control4 Infinity Edge 5 inch, 7 inch touch panels and MyHome PC features upto 12 custom buttons with dynamic labeling of buttons through the Control4 programming tab and LED feedback for button state.

MSRP: $90 USD

Advantage Air is an Australian based HVAC manufacturer based in Perth, Western Australia that sells HVAC systems in Australia and South Africa.  MyAir is Advantage Air’s premium reverse cycle air conditioning system with 10 zones and individual room airflow control.

Chowmain’s MyAir driver for Control4 will work with all models of MyAir by providing two way control and feedback.

APC’s Switched PDU’s allow you to control the power of devices in your customer’s rack. This is extremely useful for energy saving and remote troubleshooting. Integration into Control4 enables Control4 to do emergency shutdowns on low or high voltage levels or if the total power consumption is exceeding or lower than expected. This ensures that the health of your customer’s rack based equipment is maintained.

MSRP: $90 USD

BenQ provides a standard set of serial based commands that work across their range of projectors.

This driver is based on those commands which allows us to control all BenQ projectors.

The Chowmain Haiku Driver for Control4 allows integration of the Haiku based Big Ass Fans and Big Ass Lights into Control4 allowing full 2 way multispeed fan and multi level lighting control over your home.

Integration into Control4 allows control from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls and cloud based 4sight remote monitoring and control service.  On top of that it exposes control over the Haiku products in the Control4 ecosystem to provide interaction from other devices in the home. From turning off your fans and lights when you arm your security system to automatically turning them on when it detects you are at home and if the temperature is at an uncomfortable level integration provides you with so many different solutions to make your lifestyle that much easier.

Bond Bridge lets you connect your existing remote controlled ceiling fans, fireplaces, blinds and more!

This Wifi based device can be placed anywhere there is WiFi coverage making it easy to control IR/RF devices that are in locations that are hard to run cable.

Integration into Control4 allows you to activate, control fan speeds, open/close shades, turn on lights and more all from a single point using Control4's touchscreens, mobile applications, keypads, handheld remote controls, onscreen and cloud based 4sight remote monitoring service.

This driver is built specifically for those Muslim Control4 home owners who want to program their home for adhan (or azan) - the call to prayer which happens 5 times a day.

This driver will utilise latitude and longitude co-ordinates along with the timezone to return the prayer times to Control4 from the aladhan website.

We also expose a few other events that are significant.

The Contact Us webview driver for Control4 provides dealers with a professional looking contact us page on the T3 touchscreen with customisable company logo, company contact details, google map and clickable URL to the company website.

This adds the final touch to a professionally installed system and provides dealers with a cheap way of marketing their company to people who utilise the touchscreen.

ControlByWeb manufactuer IP enabled inputs, sensors & outputs. Integration into Control4 enables Control4 to monitor and control these inputs and outputs

MSRP: $100 USD

Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.

Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.

Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.

Dahua, who is a popular surveillance manufacturer, produce a range of PTZ and NON PTZ based IP cameras for a range of residential and commercial applications along with network video recorders (NVRs). As one of our top requested drivers we felt that we needed to create the ultimate Dahua driver for Control4.  We have worked closely with Dahua to ensure that the integration provides the best user experience possible.  This driver pushes the integration of Dahua by offering functionality that allows the cameras to push the boundaries of security and home automation.  This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.

The Daikin Airbase BRP15B61 lets you control your Daikin ducted or SkyAir system via apps on your phone or tablet.  This module is easily can be easily retrofit without installation of new wiring as it is powered by (and communicates via) the Daikin P1 and P2 bus terminals and communicates via wifi.

Thanks to Chowmain the Airbase is now integrated into Control4 for full two way control and feedback over  temperature, HVAC mode, setpoint, fan speed and zone control.  We have also added additional functionality to the driver to handle presets and scheduling internally.

Setup of hardware and driver should take you no more than 30 minutes once you get the hang of it.

The Chowmain Echonet Lite driver opens Control4 integration into any Echonet Lite enabled Home Air Conditioner unit. Popular manufacturer's such as Mitsubishi, Panasonic, Fujitsu, Toshiba, Daikin and more already adopt the Echonet Lite protocol.

eGauge is an affordable, flexible, secure, web-based electric energy and power meter that can measure up to 30 circuits. It is used to measure and record total building electrical consumption, solar, wind, consumption of individual circuits, such as appliances or geothermal system pumps, and motors.

The Chowmain eGauge driver provides live data feedback from the eGauge unit. This data can be viewed on the Control4 T3 touch screens. The data can be used in Control4’s programming as variables or have a minimum and maximum event trigger set in the driver itself. This provides live automated responses to changes in energy usage.

The Chowmain M1 driver for Control4 offers extensive integration of the M1 functionality to truely expand Control4's functionality to not only security based services but also occupancy and input/output expansion for automation tasks and is compatible with both Ness and ELK M1 systems.

Epson provides a universal API (ESC/VP21) for their range of projectors for both IP and RS232 based controls.

The Chowmain Epson universal projector driver for Control4 provides seamless integration of all Epson projectors via this API and allows you to control all the standard features you would expect with a projector and more.